Integrated Engineering Analysis Workflows Result in Optimized Designs and Improved Analytical Productivity by up to 50%

Exton, PA, November 28, 2017 - Bentley Systems announces – Engineering analysis for complex structural, piping, and hydrodynamic systems requires expert input from distinct collaborating design teams. Many project teams rely on paper documents and manual data transfer to collaborate. It is not uncommon for design teams located in the same building to operate in silos. This disconnected workflow model tends to be error-prone, result in time lags, and discourage iteration, as the information is packaged, delivered, interpreted, and entered into distinctly managed systems. The lack of coordination among engineers often leads to project inefficiencies, design mistakes, and in some instances, costly operational failures. These workflows also do not support the real-time collaboration that is necessary for engineering innovation.

Integrated Engineering Analysis Workflows Result in Optimized Designs and Improved Analytical Productivity by up to 50% (3)  The combination of AutoPLANT, AutoPIPE, and PULS enabled an innovative design that minimized vibrations for this gas compressor

The common modeling environment that underpins Bentley’s analysis offering is changing this paradigm, paving the way for true collaboration, as several Be Inspired Awards submissions this year demonstrate, with new integrated, analytical workflows delivering significant and real ROI.

TOYO Engineering – used STAAD and STAAD Advanced Concrete Design to engineer the structure for a very complex ethylene plant in Malaysia. Spanning teams within the Toyo group across multiple locations, the project was the first to apply advanced engineering design codes in the country, with the team developing new EN codes for Malaysia. The combination of STAAD and STAAD Advanced Concrete Design enabled Toyo Engineering to reduce engineering hours by 30 percent and construction hours by 10 percent.  

CS Softdesk – the Żuchlów’ natural gas field in Poland is the largest deposit of natural gas in the area and since the compressor station started production in 1979, it has been subjected to many modifications and extensions. To reduce the vibrations during installation (which were causing significant noise and accelerating component wear) a comprehensive redesign and reconstruction was required. CS Softdesk was brought in to search for the causes of vibrations and come up with a design that minimized these vibrations. Using AutoPLANT, AutoPIPE, and PULS, CS Softdesk carried out a dynamic, iterative analysis and design of the piping network, and produced an innovative design to solve the problem. The seamless interoperability of the Bentley applications not only enabled CS Softdesk to create an innovative solution, it allowed the company to use half the resource hours compared to working with other engineering analysis systems.

PetroVietnam Marine Shipyard – in Vũng Tàu, Vietnam PV Shipyard was retained to build the Tam Dao 05 Jack Up rig, which can operate at a depth of 120 meters and can drill to a depth of 9,000 meters. It used SACS for offshore structural analysis and design, MOSES for transportation and installation analysis, with AutoPIPE and ProjectWise to synchronize data and detect clashes. After 32 months of design and construction, PV Shipyard cut the expected transport and installation schedule by 50 percent.

Shanghai Design Branch, China Offshore Oil Engineering Co., Ltd. – for this extension project in the Bohai Bay oil field complex off the coast of China, Shanghai Design used both SACS and MOSES to quickly design the jacket and carry out the installation analysis, reducing overall project time by four weeks and saving 30 percent in engineering design hours.  

“Seamless integration of STAAD.Pro and STAAD Advanced Concrete Design has completely turned around the detailed engineering of RCC structures delivering automation, accuracy, and consistency. Iterative and complex design checks are possible with a single run synchronizing the delivery of drawings resulting in a 30 percent reduction in man-hours.” 

Ajay Marathe, Lead Engineer - Civil & Structural, Toyo Engineering

“Bentley applications allow us to preserve a multi-discipline approach in our design processes, and, at the same time, maintain a unique and specialized approach. The software allows for the engineering analyses to be performed at the scientific research level, provided that the applied method is implemented properly by knowledgeable staff.”

Maciej Rydlewicz, Ph.D. Eng., CEO Research & Development, CS Softdesk

“ProjectWise gave us the ability to coordinate over 3 million documents totaling 5 terabytes of data to give 500 participants the latest controlled information on which to base confident action. The repository provides the base of documents for ongoing asset management. The combination of SACS, MOSES, and ProjectWise enabled us to design, transport, and install a state-of-the-art jack-up rig, that increased drilling productivity for the owner and cut the expected delivery time in half.”

Phan Thanh Son, Engineering Manager, PetroVietnam Marine Shipyard   “Bentley SACS and MOSES software are essential tools for fixed offshore structural design.”  Yin Guangrong, Structural Engineer, Shanghai Design Branch, Offshore Oil Engineering Co., Ltd.


About Bentley Systems

Bentley Systems is a global leader in providing engineers, architects, geospatial professionals, constructors, and owner-operators with comprehensive software solutions for advancingthe design, construction, and operations of infrastructure. Founded in 1984, Bentley has more than 3,000 colleagues in over 50 countries, more than $600 million in annual revenues, and since 2011 has invested more than $1 billion in research, development, and acquisitions. For more information, please visit

Press Contact:

Jennifer Maguire
+1 610 458 2695

Email Contact
Follow us on Twitter:
#YII2017; #GoingDigital

Christine Byrne
Media Relations Senior Manager
Email Contact



Review Article
For more discussions, follow this link …

ClarkDietrich Digital tools

Featured Video
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
AEC Next Technology Expo + Conference & SPAR 3D Expo + Conference at Anaheim Convention Center Anaheim CA - Jun 5 - 7, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
2018 AGC Joint Contractors Conference at WASHINGTON DC - Sep 30 - 3, 2018
2018 ASLA Annual Meeting and EXPO at Philadelphia - Oct 19 - 22, 2018
Bentley: -YII 2018 Awards
AIA 2018 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise