ArchShowcase

Archive for the ‘Autocad’ Category

Lingo Construction Services in Oklahoma City, OK by Elliott + Associates Architects

Tuesday, April 15th, 2014

Article source: Elliott + Associates Architects

Located in the historic Automobile Alley District of Oklahoma City the design seeks to transform an existing 1930 historic masonry and steel building into a modern office space. The character of the 12,000 sq. ft. two story building, originally built for Sharp Auto Supply Co, had been diminished by thick layers of paint, historically inaccurate additions, and years of misguided design efforts.

The building covers the entire lot. There is 10 feet of additional space on the north end that allowed us to construct a fire stair, mechanical enclosure, and covered outdoor deck. This exterior construction made it possible to leave the interior intact. The open framing is consistent with the exposed studs on the interior that dramatizes the construction behind the walls., Image Courtesy © Scott McDonald, Hedrich Blessing

  • Architects: Elliott + Associates Architects
  • Project: Lingo Construction Services
  • Location: Oklahoma City, OK, U.S.A
  • Photography: Scott McDonald, Hedrich Blessing
  • Software used: AutoCAD Architecture 2013, Sketchup (E+A) and 3ds MAX (Skyline Ink)
  • Client: Stan Lingo
  • Completed: March 2013
  • Scope: 12,260 sq. ft.   
  • Cost: Withheld per Owner’s request
  • Awards: 2013 Interior Design, “Best of Year” in Office/ Renovation Category, 2013 Project of the Year, Association of Subcontractors of Oklahoma

Marcel Sembat high school in Sottevillelès Rouen, France by archi5

Friday, April 11th, 2014

Article source: archi5

On an abandoned suburb, the project made waking up every day to attend school under an outstanding green-roofed structure as a child’s right.

The Marcel Sembat High School offers technical education about motors and vehicle mechanics. It demands vast spaces with high ceilings and large surfaces. It’s located in a declining industrial suburb of the port of Rouen, France.

Image Courtesy © Sergio Grazia, Thomas Jorion

  • Architects: archi5
  • Project: Marcel Sembat high school
  • Location: Sottevillelès Rouen, France
  • Photography: Sergio Grazia, Thomas Jorion
  • Software used: Autocad and Adobe Creative Suite
  • Client: Haute Normandie district.
  • Collaborators: B. Huidobro, IOSIS Ouest, SPEC, ABC Décibel
  • Steel structure contractor: Constructions Métalliques Charondière
  • Main contractor: Millery Colas
  • Surface: 12 764 m2
  • Cost: 35 320 318 Euros without taxes
  • Time-table: competition winner October 2005 – Completion 2011
  • Steel structure size: 83 x 141 m
  • Steel structure weight: 1000 tons

Sheepfold Balloo in Drenthe, Netherlands by DAAD Architecten

Wednesday, April 9th, 2014

Article source: DAAD Architecten

DAAD Architecten has designed a new sheepfold, with a pitched barn and wool studio, in Balloo in Drenthe. The site, which was ruined through a fire, on the edge of the Balloo es [heightened plots of farmland, specific to Drenthe], has been developed into a public, central green, with spaces for education, information and art.

the new sheepfold combines a landscape approach for the entire site, Image Courtesy © Marianne Berkhoff

  • Architects: DAAD Architecten
  • Project: Sheepfold Balloo
  • Location: Drenthe, Netherlands
  • Photography: Marianne Berkhoff
  • Software used: Vectorworks, Modelmaking, Hand drawings, AutoCad
  • Realisation: 2013

Eckelmann AG in Wiesbaden, Germany by CHRIST.CHRIST. associated architects

Tuesday, April 8th, 2014

Article source: CHRIST.CHRIST. associated architects

Eckelmann AG was established in 1977. This medium-sized company offers its customers practical solutions for electronic machine controls and software development and system integration for the system automation. The spectrum ranges from compact device control through to the automation of scattered industrial systems.

Image Courtesy © CHRIST.CHRIST. associated architects

  • Architects: CHRIST.CHRIST. associated architects
  • Project: Eckelmann AG
  • Location: Wiesbaden, Germany
  • Software Used: Autocad
  • Staff: Ronni Neuber, Christiane Bolesta
  • Structural design: Schmitt + Thielmann und Partner | Wiesbaden
  • Construction volume: Floor space 1,400 m², Gross floor space 2,000 m², Gross capacity 7,750 m³
  • Realisation: 2012-2013

MAIN STREET HOUSE in Seattle, WA by SHED Architecture & Design

Tuesday, April 8th, 2014

Article source: SHED Architecture & Design

Located in Seattle’s Leschi neighborhood the Main Street House takes its name from the unimproved right of way and pedestrian path that bounds its site to the north. The single family house was built for a husband and wife, both geologists, nearing retirement but actively working from home.

Image Courtesy © Mark Woods

  • Architects: SHED Architecture & Design
  • Project: MAIN STREET HOUSE
  • Location: Seattle, WA, U.S.A
  • Photography: Mark Woods
  • Software Used: Sketch up and Autocad
  • Square Footage: 2,332
  • Contractor: David Gray Construction
  • Landscape Desgin: Urban Wilds
  • Structural Engineer: Harriott Valentine Engineers

Angela Nikoletti Square, Bolzano in Italy by Roland Baldi architects

Tuesday, April 8th, 2014

Article source: Roland Baldi architects

The new public square gives access to the different structures of the district center and the adjacent urban park. It also acts as a meeting ground for the residents and offers people a space for outdoor events. The square is paved with a with two-tone cobblestone zebra pattern from white Lasa marble and black basalt. Through an undulating elevation of the paving in the northeast area of the square a planter with seat function with different heights and different inclinations was created.

Image Courtesy © Roland Baldi architects

  • Architects: Roland Baldi architects
  • Project: Angela Nikoletti Square, Bolzano
  • Location: Italy
  • Photography: Oskar Da Riz
  • Software used: Autocad LT

THE EL PINAL KINDERGARTEN in Medellín, Colombia by Felipe Bernal Henao + Javier Castañeda Acero + Alejandro Restrepo Montoya

Thursday, April 3rd, 2014

Article source: Felipe Bernal Henao + Javier Castañeda Acero + Alejandro Restrepo Montoya

Background and Context

Since 2008, 21 new kindergartens have been built in Medellín in barrios with problems of insecurity and social inequality.  The El Pinal Kindergarten was awarded through a public architectural tender and has been conceived as a space for education, culture and life.  The project is located on the slopes of the central – eastern area of Medellín, in a sector of unplanned settlements and informal housing.

Image Courtesy © Juan Felipe Gómez Tobón

  • Architects: Felipe Bernal Henao + Javier Castañeda Acero + Alejandro Restrepo Montoya
  • Project: THE EL PINAL KINDERGARTEN
  • Location: Medellín, Colombia
  • Photography: Juan Felipe Gómez Tobón
  • Software used: Autocad 2014, Sketch up and 3D-Max. 
  • STRUCTURAL DESIGN: Jorge Arbeláez
  • HYDROSANITARY DESIGN: Caudales y Presiones S.A.
  • ELECTRICAL AND ILLUMINATION DESIGN: Lighten S.A.
  • LANDSCAPING DESIGN: Andrés Ospina
  • ARCHITECTURAL DESIGN CONSULTANT: Carlos Mario Rodríguez Osorio
  • BIOCLIMATIC AND ERGONOMIC DESIGN: Ader Augusto González, PVG Arquitectos
  • YEAR: 2012
  • SURFACE AREA: 850 m2
  • ARCHITECTURAL – DESIGN AND PROJECT – DEVELOPMENT GROUP: Juan David, Cerón Betancur, Luis Felipe Cardona, Juan Esteban Parra Henao, Pablo Rico Álvarez, Parmenio Bedoya Aguirre, Maritza Mejía, Sebastián Vallejo Palacio, Eugenio Lara Rodríguez, Martina Centeno, Carlos Ossa, Steven Yepes, Camilo Arenas, Maida González, Alejandro Vanegas, Yuri Rosero, David Hernández, Santiago Bedoya Macías, Felipe Valencia Herrera

Discarded construction trailer transformed into small dwelling in Beerse, Belgium by karel verstraeten

Tuesday, April 1st, 2014

Article source: karel verstraeten 

After purchasing a discarded construction trailer for just €15, owners Kris and Griet together with Ghent-based architect practice Karel Verstraeten have transformed it into an inhabitable space.

Wanting to create a small dwelling that could be used for either studying and resting or partying, the unit was pulled to the back of the garden by a local farmer. Its existing structure was completely stripped back and replaced with new materials.

Image Courtesy © karel verstraeten

  • Architects: karel verstraeten
  • Project: Discarded construction trailer transformed into small dwelling
  • Location: Beerse, Belgium
  • Photography: karel verstraeten
  • Software Used: Autocad 2013
  • Year: 2013-2014
  • All construction was done by the client: Kris & Griet, Miel & Rein (the sons) and Hugo (Kris’ father)

Rectangle parallelepiped House in Vilnius, Lithuania by Devyni architektai

Sunday, March 30th, 2014

Article source: Devyni architektai

Worship of rectangle! But levels in volumes are linked by arched elements (stairs). intrigating?

The very process of designing of this house was like a materialization of every architect’s dream – awesome land plot in pinewood park in the very best suburb of Vilnius, young ambitious and very demanding owners seeking for the best quality and extraordinary high-end solid house for their family to live in.

Image Courtesy © Arunas Skrolis

  • Architects: Devyni architektai
  • Project: Rectangle parallelepiped House
  • Location: Vilnius, Lithuania
  • Photography: Arunas Skrolis
  • Software used: Revit & Autocad.
  • Architect In Charge: Jurgita Liubartaite, Arunas Skrolis
  • Area: 360 sqm
  • Year: 2013

Spire Edge in Manesar, India by T.R. Hamzah & Yeang Sdn Bhd

Sunday, March 30th, 2014

Article source: T.R. Hamzah & Yeang Sdn Bhd

Spire Edge office tower stands as an iconic landmark on a new IT park located in Manesar, Gurgaon, India.

The tower is a 21 storey building accommodating offices, auditorium, gallery and other facilities.

Ecoinfrastructure

The key design feature of the iconic tower is a continuous green ecoinfrastructure at the north façade, ascending up the tower through green ramps from the basement, infusing it with an ecological and social terraces and garden and back down on the rear facade by a series of ramps around a meeting room.

Image Courtesy © T.R. Hamzah & Yeang Sdn Bhd

  • Architects: T.R. Hamzah & Yeang Sdn Bhd
  • Project: Spire Edge
  • Location: Manesar, India
  • Software used: Autocad
  • Client: A.N Buildwell PVT. LTD
  • Nos. of storeys: 20 storeys + Roof Garden
  • Site Areas: 4,765 sq.m
  • Proposed Development: Commercial and Offices
  • Total GFA: 22,559 sq.m
  • Plot Ratio: 1:4.7
  • Principal-in-Charge: Ken Yeang
  • Design Manager: Haytham Danoon
  • Project Architect: Glen Pang
  • Design Architect: Khairi Ismail
  • Assistant Designer: Jermaine Chau, Shafiqa Shamshul
GRAPHISOFT
Bentley:
CADalog.com - Countless CAD add-ons, plug-ins and more.



Click here for Internet Business Systems © 2014 Internet Business Systems, Inc.
595 Millich Dr., Suite 210, Campbell, CA 95008
+1 (408) 850-9202 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and ResumesEDACafe - Electronic Design AutomationGISCafe - Geographical Information Services	MCADCafe - Mechanical Design and EngineeringShareCG  - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy