ArchShowcase

Archive for the ‘FormZ’ Category

Tucson Mountain Lava House in Pima County, Arizona by Paul Weiner | DesignBuild Collaborative

Wednesday, March 26th, 2014

Article source: Paul Weiner | DesignBuild Collaborative

The Tucson Mountain Lava House is situated within the eastern alluvial flow of the Tucson Mountains, a terrain that falls gently toward the Santa Cruz River. Defined by a wide drainage to the south, the landscape is richly populated by low-lying bedrock outcroppings, saguaro and barrel cacti, palo verde, ocotillo, jojoba, and creosote.

Image Courtesy © Liam Frederick Photography

  • Architects: Paul Weiner | DesignBuild Collaborative
  • Project: Tucson Mountain Lava House
  • Location: Pima County, Arizona
  • Photography: Liam Frederick Photography
  • Software used: FormZ, AutoCAD and Photoshop
  • Design Team: Paul Weiner, Paul Reimer
  • Year Completed: 2013
  • Area: 2600 sf + garage
  • Structural Engineer: Schneider Engineering
  • General Contractor: Paul Weiner | DesignBuild Collaborative
  • Construction Supervisor: Craig Coryell
  • Paul Schwam: Scoria Consultant and Collaborator

Modern Farmhouse BY Design Insight Inc.

Saturday, November 2nd, 2013

Article source: Design Insight Inc.

Image Courtesy © Craig Caulfield

  • Architects: Design Insight Inc.
  • Project: Modern Farmhouse
  • Photography: Craig Caulfield
  • Software used: AutoCad, formZ
  • Interior designer: Lynne Shears, ASID
  • Local architects: BHH
  • GC: Tomlinson & Sons, Inc.

Dear Ginza bldg in Tokyo, Japan by amano design office

Wednesday, September 25th, 2013

Article source: amano design office

The client is a developer company. It purchased a long-sought after lot in Ginza, and planned to build a commercial  office building.

The building site is on the Ginza 1-chome Gaslight Street, which is one street behind the Ginza Central Street.

It is on the back side of the Mizuho Bank and Pola Ginza buildings on the Central Street. The atmosphere is quite different from the gorgeous Central Street, and the site is on an empty street which is often seen behind the street with large-sized buildings.
Attracting as many people as possible into such a street is our task. The client desired the building to be a gorgeous existence.

Image Courtesy © Nacasa & Partners Inc.

  • Architects: amano design office
  • Project: Dear Ginza bldg
  • Location: Tokyo, Japan
  • Photography: Nacasa & Partners Inc.
  • Completion year: March 2013
  • Collaborators: Atorie Oica, Azzurro Architects
  • Construction firm: Kumagai Gumi Co.,Ltd.
  • Main use: Store building and Office building
  • Lot size: 187.20m2
  • Building area: 155.55m2
  • Total floor space: 1300.02m2
  • Maximum height above rail level: 31.955m
  • Structure: Steel frame
  • Number of stairs or stories: Nine stories above ground and one undergr0und story
  • Main material: Aluminum Graphic punching metal, Extruded cement panel
  • Software used: formz

CASA PETRINI VILLANI IN Polignano a Mare, Bari, Italy BY arch. Antonella MARI

Thursday, September 5th, 2013

Article source: arch. Antonella MARI

The house for a psychologist, a nurse and their young daughter is designed as the extension of an existing one-floor building in the historic center of Polignano a Mare, in southern Italy. While the old tufo facade remains almost unmodified, the new volume above is clearly defined through the use of lighter materials: a double skin system – made of  glass/aluminum large windows screened by steel and wood retractable panels – allows natural light in, while preventing heating.

Image Courtesy © arch. Antonella MARI

  • Architects: arch. Antonella MARI
  • Project: CASA PETRINI VILLANI
  • Location: Polignano a Mare, Bari, Italy
  • Owners: Monica VILLANI_Stefano PETRINI
  • Design team: arch. Matteo LORUSSO, arch. Wanessa BRUNO
  • Structures: eng. Antonio LONUZZO
  • Date: 2008/2011
  • Size: 150 sqm
  • Costs: 200.000 Euro
  • Concrete and stone works: Pasquale Teofilo
  • Finishing: Vito Laporta
  • Metal works: Metal srl, Vito Masi, Arte in Ferro
  • Wooden works: Giovanni e Giuseppe Teofilo
  • Software used: FormZ for 3D modeling and Autocad for 2D drawings

Farmers Fishers Bakers in Washington, DC by GrizForm Design Architects

Saturday, July 27th, 2013

Article source: GrizForm Design Architects

Farmers Fishers Bakers, a 9,700­ square­-foot restaurant in Washington, DC, is an original and creative restaurant venue that seamlessly combines form, function, and creativity. The space formerly housed Farmers & Fishers, a restaurant ruined after the Potomac River in Washington, DC flooded the space. The owners called on a local DC­based architecture and interior design firm to re-imagine the restaurant as one with a farm theme full of folk­like touches and unusual materials with an emphasis on custom design.

Image Courtesy © GrizForm Design Architects

  • Architects: GrizForm Design Architects
  • Project: Farmers Fishers Bakers
  • Location: Washington, DC , U.S.A
  • Software used: Form z for design and auto cad for production

Private residence in Marathonas, Greece by LKMK ARCHITECTS

Thursday, June 27th, 2013

Article source: LKMK ARCHITECTS

The programme for this private house is mostly organized on one single floor, except for one bedroom and the office that are situated at first floor level. The ground floor is divided into three zones: the bedrooms, the living room and kitchen. Looking at the exterior, the house consists of 3 volumes.

Image Courtesy © Tzortzis George

  • Architects: LKMK ARCHITECTS
  • Project: Private residence
  • Location: Marathonas, Greece
  • Photography: Tzortzis George
  • Structural Engineer: Gavalas Philippos (www.fgavalas.gr)
  • Construction Year: 2007
  • Software used: Autocad and Formz

Companhia das Culturas in S. Bartolomeu, Portugal by Ressano Garcia Arquitectos

Wednesday, April 3rd, 2013

Article source: Ressano Garcia Arquitectos

Companhia das Culturas is an old rural farm that has been completely redesigned to accommodate cultural events. The project aims to value local cultural expressions and make use of contemporary technologies to achieve a high standard of sustainability.

Image Courtesy © Manuel Aguiar

  • Architects: Ressano Garcia Arquitectos
  • Project: Companhia das Culturas
  • Location: S. Bartolomeu, Portugal
  • Photography: Manuel Aguiar
  • Software used: FormZ, illustrator and progeCAD

(more…)

Periscope House in Kanagawa Prefecture, Japan by Kuno + Aida

Friday, August 10th, 2012

Article source: Kuno + Aida

A single-family residence located in a typical residential area, where two-story wooden houses are densely built. In order to obtain fine living environment while giving a minimum impact on the surroundings, we proposed a plan in which three volumes of the bedroom with the opening turned for the south are pulling out from the roof level as if they were a set of periscopes.

Image Courtesy Tatsuya Noaki

  • Architects: tele-design + Kuno + Aida
  • Project: Periscope House
  • Location: Zushi-shi, Kanagawa Prefecture, Japan
  • Program: Single Family Residence
  • Architects: Toshimitsu Kuno + Tomoro Aida (tele-design + Kuno Lab. + Aida Atelier, Inc.)
  • Design Team: Toshimitsu Kuno + Tomoro Aida + Yuki Nokura + Kazuki Watanabe + Satoshi Suzuki + Toshiharu Terashima
  • Software used: AutoCAD, FormZ, Illustrator, Photoshop

(more…)

Saijo Clinic in Tokyo, Japan by Aida Atelier, Inc.

Friday, July 20th, 2012

Article source:  Aida Atelier, Inc.

Saijo Clinic is a private mental health clinic with short-care/group-care programs on the 11th floor penthouse of a building facing Shinjuku Gyoen Park, 58ha urban park located in central Tokyo. The penthouse was originally built as a part of a gigantic signboard on rooftop. The sign graphic was later abolished by newly introduced landscape regulations, however, the space inside was left over. In designing the interior of the clinic, we sought to incorporate the extraordinary contrast between different urban scales.

Image Courtesy Tatsuya Noaki

  • Architects:  Aida Atelier, Inc.
  • Project: Saijo Clinic
  • Location:Shinjuku, Tokyo, Japan
  • Program: Mental Clinic
  • Design Team: Tomoro Aida + Shinpei Uehara
  • Sign design: Takeru Ide
  • Construction: Apex, LTD.
  • Furniture: inter.office
  • Design: 12/2010 – 02/2011 (3 months)
  • Construction: 02/2011 – 03/2011 (1 month)
  • Floor: 11F (Penthouse)
  • Floor area: 116.56m2
  • Photography: ©Tatsuya Noaki
  • Software used: AutoCAD, FormZ, Illustrator, Photoshop

(more…)

N-House in Tokyo, Japan by Takato Tamagami Architectural Design

Wednesday, July 18th, 2012

Article source: Takato Tamagami Architectural Design

This is a two-generation family housing situated on high ground in Tokyo metropolitan area. The housing is composed of two interlocked volumes of A-House and B-House.  We intend to provide completely different spatial sequences in both houses.

The site is 15m(width) x 30m(length), long in south-north direction. Church, which is mainly used as facility for wedding parties, is located on the west side. We created a U-shaped volume and a courtyard in the middle, in order to get enough sunlight from all directions. Exterior finish is white cement plaster exposed aggregate finish with coral sand. The white volume sits on the basement, where separate entries to both houses and car parking are located.

Image Courtesy Masaya Yoshimura

  • Architects: Takato Tamagami Architectural Design
  • Project: N-House
  • Location: Tokyo, Japan
  • Construction:  SATOHIDE corporation
  • Photographer:  Masaya Yoshimura
  • Scope of work:  new construction
  • Structure:  reinforced concrete structure
  • Principal use:  Residence
  • Total floor area:  586.87m2
  • Construction Period:  2010.10.18~2012. 2.17
  • Software used: Vectorworks to draw 2D and FormZ to draw for 3D

(more…)

GRAPHISOFT
Bentley:Rapid deployment in a secure cloud-computing environment
CADalog.com - Countless CAD add-ons, plug-ins and more.



Click here for Internet Business Systems © 2014 Internet Business Systems, Inc.
595 Millich Dr., Suite 210, Campbell, CA 95008
+1 (408) 850-9202 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and ResumesEDACafe - Electronic Design AutomationGISCafe - Geographical Information Services	MCADCafe - Mechanical Design and EngineeringShareCG  - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy