Open side-bar Menu
 ArchShowcase

Archive for the ‘Cinema 4D’ Category

‘Henri Dutilleux’ Conservatoire of Music, Dance and Dramatic Arts in Lukas, France by Dominique coulon & associés

Wednesday, January 27th, 2016

Article source: Dominique  coulon  & associés

The building is located in the upper part of the town. It backs onto the woods, forming the final outlying limit of the built-up area. Echoing the open landscape, it faces to Belfort Lion on the hilltop opposite. In this strong context, the building offers its solidity, an almost opaque mass of grey concrete.

Image Courtesy © Eugeni Pons

Image Courtesy © Eugeni Pons

  • Architects: Dominique coulon & associés (Dominique Coulon, Steve Letho Duclos)
  • Project: ‘Henri Dutilleux’ Conservatoire of Music, Dance and Dramatic Arts
  • Location: 1 Rue Paul Koepfler, 90000 Belfort, France
  • Photography: Eugeni Pons
  • Architects assistants: Guillaume Wittmann, Lukas Unbekandt
  • Construction site supervision: Steve Letho Duclos, Lukas Unbekand
  • Engineers and consultants:
    • Structural Engineer: Batiserf Ingénierie
    • Electrical Engineer: BEE.FL
    • Mechanical Plumbing Engineer: Solares Bauen
    • Cost Estimator: E3 économie
    • Acoustics: Euro Sound Project
  • Program: 32 classrooms, 6 collective classrooms, 4 rehearseal collective rooms, 4 Studios
  • Auditorium: 140 seats, Amphitheater: 70 seats, Dance Hall, Media library, Drama room, Percussion room
  • Surface: 3895 m2
  • Budget: 6 326 000 € H.T
  • Schedule:
    • Competition: Février 2011
    • Plans and technical phases: From april 2011 to june 2012
    • Construction: From june 2012 to september 2015
  • Software used: Vectoworks, Cinema4D, Vray

(more…)

CEDRUS Residence in Harrington, Canada by BOOM TOWN

Tuesday, October 13th, 2015

Article source: v2com

Located on the shore of the Gate Lake, on a slightly sloping land of almost 80 000 pi2, the chalet takes place on the edge of a cedar wood with majestic mature incline trunk trees. Although the footprint of this two-storey building is substantial, because the roof slope follows the landscape the impact of it site integration is minimal.

Image Courtesy © Angus McRitchie

Image Courtesy © Angus McRitchie

  • Architects: BOOM TOWN 
  • Project: CEDRUS Residence
  • Location: Harrington, Canada
  • Photography: Angus McRitchie
  • Software used: Form*Z, CINEMA 4D, AutoCad
  • Architect in Charge: Eric Joseph TREMBLAY
  • General contractor: Luc Corbeil (Bois et Nature construction)
  • Structural engineer: Pierre Brassard (GENIEX)
  • Mechanical engineer: Guillaume Dupré (PLANEKO)
  • Interior design: BOOM TOWN et Mario Januario (MJ Design)
  • Landscaping and horticulture: Jean-Philippe Laliberté
  • Cabinet making: Jean-François Asselin (Atelier Boisteck)
  • Lighting: Antoine Laverdière (LumiGroup)
  • Stairs and railings: Martin Bättig (Bättig Design)

(more…)

PALAZZO DI VIGONOVO in Venice, Italy by 3ndy Studio

Thursday, August 20th, 2015

Article source: 3ndy Studio

3ndy Studio, architecture and design, was committed for the renovation of the Campiello “Corten Apartments”, which has been inaugurated on september 2011. The project reached its goal of retraining a very important part of Vigonovo Venice, realizing a new place of social aggregation in completion with the historical center.

Image Courtesy © Fernando Guerra

Image Courtesy © Fernando Guerra

  • Architects: 3ndy Studio
  • Project: PALAZZO DI VIGONOVO
  • Location: Veneto 5d, 30030 Vigonovo Venice, Italy 
  • Photography: Fernando Guerra
  • Software used: Archicad, Cinema 4D
  • Project Author: Marco Mazzetto, Alessandro Lazzari, Massimiliano Martignon architects
  • Client: Cosmo Immobiliare snc.
  • Façadeartists: 3ndy Studio, Giorgio Milani, Philippe Daverio
  • Gross floor area: 300 m2
  • Year of completion: 2011

(more…)

Cliffs Impasse in Senneville-sur-Fécamp, France by ZIEGLERAntonin architecte

Saturday, June 13th, 2015

Article source: ZIEGLERAntonin architecte

BeyondtheWalls

On the last path before the earth falls away into these , a small country house is tucked into a nembankment. Introverted on the edge of the cliffs, it protects it self from the wind sand the ocean spray. Inside, piles of book sares tacked in every corner and recess.The rhythm of the day is marked by the turning of pages and punctuated by the coming sand going of the house cats.

Image Courtesy © Antonin Ziegler

Image Courtesy © Antonin Ziegler

  • Architects: ZIEGLERAntonin architecte
  • Project: Cliffs Impasse
  • Location: Impasse des Falaises 76400 Senneville-sur-Fécamp, France 
  • Photography: Antonin Ziegler
  • Software used: Archicad, Cinema 4d, Maxwell, Photoshop
  • Design Team: Antonin Ziegler
  • Contractor / Contracting Authority: Private
  • Area: 60sqm
  • Cost: 80 000 € HT

(more…)

‘Ai Cadelach’ Hotel in Treviso, Italy by STUDIO DI ARCHITETTURA DANIELE MENICHINI

Wednesday, January 28th, 2015

Article source: STUDIO DI ARCHITETTURA DANIELE MENICHINI 

The concept for the hotel was inspired by its location – two lakes and a green valley surrounded by the steep, forested slopes of Belluno’s Alpine foothills, where the dominating element is the woodlands. This was the key factor on which Daniele Menichini’s architect’s studio based their project and Toscana Interiors carried it out. The woods were abstracted and reconstructed inside the bedrooms to create a link with the outside, featuring sycamore, linden, willow, birch, poplar, elm, beech and sweet chestnut trees. Trees outside and trees indoors, creating a comfortable and welcoming environment, a warm and physical place to spend the night, dreaming of sleeping outdoors under a starry sky.

Image Courtesy © STUDIO DI ARCHITETTURA DANIELE MENICHINI

Image Courtesy © STUDIO DI ARCHITETTURA DANIELE MENICHINI

(more…)

GREEN ROOM in Rimini, Italy by STUDIO DI ARCHITETTURA DANIELE MENICHINI

Tuesday, January 27th, 2015

Article source: STUDIO DI ARCHITETTURA DANIELE MENICHINI 

The “green room” project originates from architect Daniele Menichini’s eco-sustainable and eco-friendly approach to the projects he develops for the horeca sector, as well as for other client areas.

Each concept is developed by means of a search for solutions and products that have the least possible environmental impact and maximum energy saving – a philosophy that does not preclude elements of development, innovation and technology.

Image Courtesy © STUDIO DI ARCHITETTURA DANIELE MENICHINI

Image Courtesy © STUDIO DI ARCHITETTURA DANIELE MENICHINI

(more…)

The sea anemone and the hermit crab, a wooden house on the roof in Revine Lago, Italy by Studio Daniel Menichini

Thursday, January 22nd, 2015

Article source: Studio Daniel Menichini

This expansion project, in order to create a private home within a building complex, is based on the recovery of the top floor of a building used as a hotel, and its large pocket terrace.

Image Courtesy © Studio Daniel Menichini

Image Courtesy © Studio Daniel Menichini

  • Architects: Studio Daniel Menichini
  • Project: The sea anemone and the hermit crab, a wooden house on the roof
  • Location: Revine Lago, Italy
  • Software used: Autocad and Cinema 4d

(more…)

New building Drehmo Wenden in Germany by wurm + wurm architekten

Wednesday, December 17th, 2014

Article source: wurm + wurm architekten

In Wenden, the southernmost town of the german region of Sauerland electro mechanical actuators for water management, the power plant sector and the oil and gas industry are manufactured.

The special cut of the new building of the Drehmo GmbH is owed the topographical situation in this region. The moving landscape caused the terracing of the landscape and produces irregularly shaped lot. The unusual floor plan, generated by this contour, and the hillside situation with a view over the valley determine the character and exceptional styling.

Image Courtesy © Ester Havlova, Walter Fogel

Image Courtesy © Ester Havlova, Walter Fogel

  • Architects: wurm + wurm architekten
  • Project: New building Drehmo Wenden
  • Location: Wenden, Germany
  • Photography: Ester Havlova, Walter Fogel
  • Software used: AutoCad, Vectorworks and Cinema4D
  • Client: Drehmo GmbH Zum Eichstruck 10, 57482 Wenden
  • Support structure planning: GmbH, Bühl
  • Square metres7500 m²
  • Design: 2009
  • Completion: 2013

(more…)

[IN]-Closure by ABF-lab

Wednesday, November 5th, 2014

Article source: ABF-lab

At the time when Seattle wonders what course to follow for a lasting transformation on public spaces, the [in]-closure project puts itself as the mainspring of the urban revival for the next five decades. Slow decision-making processes increased by fast practice changes and modern means of communication as globalized dematerialization implies that, nowadays, traditional urban planning methods are reaching the limit. You can plan an urban project; it will be obsolete even before seeing the light.

Image Courtesy © ABF-lab

Image Courtesy © ABF-lab

  • Architects: ABF-lab
  • Project: [IN]-Closure
  • Software used: 
    • For Design : Autocad, Sketchup, Rhino, Photoshop, In Design, Illustrator, After effect, 3DS max, Cinema 4D, V-ray, Maya
    • For sustainability strategy: Meteonorm, Ecotect, Radiance, Flovent, Ies

(more…)

CC WEDDING, OCEAN in NJ by RAZORTOOTHDESIGN LLC

Friday, May 9th, 2014

Article source: RAZORTOOTHDESIGN LLC

Custom design ceiling and free standing corner partitions define dance floor at Ocean  wedding.

Dance floor dimensions: 30’x30’x 14’h
material: 1/8\” PVC with 1×1 aluminum supports.
pattern: VINES

Custom design partitions for buffet section at Ocean wedding.
Partition dimension: 24′ x 8′ x 4.75\”
material: 1/4\” PVC with 1×1 aluminum supports and floor plates.
pattern: WEAVE

Image Courtesy ©  RAZORTOOTHDESIGN LLC

Image Courtesy © RAZORTOOTHDESIGN LLC

  • Architects: RAZORTOOTHDESIGN LLC
  • Project: CC WEDDING, OCEAN
  • Location: NJ, U.S.A
  • Software used: All of our projects are modeled in RHINO and rendered in CINEMA4D.

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon: CW910
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 210, Campbell, CA 95008
+1 (408) 850-9202 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy