Open side-bar Menu
 ArchShowcase

Posts Tagged ‘Brazil’

Fernando Jaeger Store – Moema in São Paulo, Brazil by SuperLimão Studio

Thursday, December 24th, 2015

Article source: SuperLimão Studio

The new store of Fernando Jaeger has 400sqm and 3 floors: the basement contains the parking and area for technical loading and unloading. The ground floor and upper floor houses the furniture products developed by the brand and support areas.

Image Courtesy © Maíra Acayaba

Image Courtesy © Maíra Acayaba

  • Architects: SuperLimão Studio
  • Project: Fernando Jaeger Store – Moema
  • Location: São Paulo, Brazil
  • Photography: Maíra Acayaba
  • Authors: Lula Gouveia, Thiago Rodrigues, Sérgio Cabral, Antonio Carlos Figueira de Mello
  • Collaborator: Juliana Sae
  • Landscape Design: Fernando Jaeger e SuperLimão Studio
  • Light Design: Reka, LDArti
  • Contractor: ANF Engenharia
  • Area: 600m2
  • Year: 2015

(more…)

São Carlos Federal University Advanced Materials and Energy Research Center in Brazil by Vigliecca & Associados

Saturday, December 5th, 2015

Article source: Vigliecca & Associados 

Vigliecca & Associados developed a project that unites in a single building the complexity of eight high-end materials and clean fuel research laboratories located at São Carlos Federal University, one of the main universities in Brazil, creating a naturally fresh and bright environment in the midst of São Paulo state’s torrid countryside.

Image Courtesy © Leonardo Finotti

Image Courtesy © Leonardo Finotti

  • Architects: Vigliecca & Associados 
  • Project: São Carlos Federal University Advanced Materials and Energy Research Center
  • Location: São Carlos, São Paulo, Brazil
  • Photography: Leonardo Finotti
  • Software used: Autocad
  • Architecture and Urban Planning: Vigliecca & Associados – Héctor Vigliecca, Luciene Quel, Ruben Otero, Ronald Werner Fiedler, Neli Shimizu (authors), Adda Ungaretti, Paulo Serra (team), Luci Maie (administration)
  • Administration: FAI – Fundação de Apoio Institucional ao Desenvolvimento Científico e Tecnológico (Institutional Scientific and Technological Support and Development Foundation)
  • Project Coordinator: Professor Ernesto A. Urquieta-González, Ph.D. – CCET/UFSCar
  • Institutional Consultant: Escritório de Desenvolvimento Físico – EDF/UFSCar (Physical Development Office)
  • Technical Consultant: Professor Sandra Mota Silva, Ph.D. – DECiv/UFSCar (more…)

House Vale do Soli in Nova Lima, Brazil by Marcos Franchini

Wednesday, December 2nd, 2015

Article source:  Marcos Franchini

The garden that used to serve the family country house for several decades along with a narrow henhouse in which children were running in all directions, together chicks, chickens and a leafy cock was the starting point for the design of this house.

Image Courtesy © Gabriel Castro (Reverbo)

Image Courtesy © Gabriel Castro (Reverbo)

  • Architects: Marcos Franchini
  • Project: House Vale do Soli
  • Location: Vale do Sol, Nova Lim, Brazil
  • Photography: Gabriel Castro (Reverbo)
  • Software used: Autocad, Sketchup
  • Area: 260m2
  • Construction: 2010 – 2012
  • Project: 2009

(more…)

Toy House in São Paulo, Brazil by Pascali Semerdjian Arquitetos

Saturday, November 28th, 2015

Article source: Pascali Semerdjian Arquitetos 

This 247m2 Toy House is located in São Paulo, Brazil, a few meters from the house where the family lives. The project was conceived as a huge play place for a fast growing family, designed to be home for the children’s toys and venue to host parties and events for all members.

The discrete entrance, for security purpose, opens up with an invitation to play. A stair-case leads visitors to choose among three different levels.

Image Courtesy © Pascali Semerdjian Arquitetos

Image Courtesy © Pascali Semerdjian Arquitetos

(more…)

Box House in Curitiba, Brazil by Arqbox

Thursday, November 19th, 2015

Article source: Arqbox

House set in a 319 m² plot in a gated community in the city of Curitiba. The customer demand was to build a spacious and integrated residence, in which service and social spaces should be on the ground floor and private areas on the upper floor. At least bedroom suites, a family room and office, kitchen, living/ dining room, laundry and garage for two vehicles. Additionally, a toilet adjacent to the main access, a storage connected to the kitchen and a deposit to the garage were included to the program.

Image Courtesy © Nenad Radovanovic

Image Courtesy © Nenad Radovanovic

  • Architects: Arqbox ( arch. Jacksson Depoli and arch. Michelle Schneider)
  • Project: Box House
  • Location: Curitiba, Brazil
  • Photography: Nenad Radovanovic
  • Plot Area: 319,83 m²
  • Total Area: 280,30 m²
  • Project Year: 2011
  • Construction Year: 2014

(more…)

Unilever Aguaí in São Paulo, Brazil by GCP Arquitetos

Saturday, November 14th, 2015

Article source: GCP Arquitetos

The architectural party adopted in the new Unilever Aguaí Site project, meets three important needs, typical of contemporary industrial compounds: flexibility, rationalization and sustainability, becoming a twenty first century industrial site model for Unilever.

Image Courtesy © GCP Arquitetos

Image Courtesy © GCP Arquitetos

  • Architects: GCP Arquitetos
  • Project: Unilever Aguaí
  • Location: : Aguaí, São Paulo, Brazil
  • Software used: AutoCAD and SketchUp
  • Team: Sérgio Coelho (author),  Daniel Mariano (co-author), Nilton Rossi, Gabriela Garcia, Dalmary Rubio, Babara Gasco, Marília Neves e Marysol Brito
  • Project Coordination and Sustainability: Alessandra Araujo
  • LEED Consultant: Cushmamn & Wakefield
  • Site Area: Total: 980,000 sqm2 – Phase 1: 170,000 sqm2
  • Built Area: 24,500 sqm2
  • Year of the design: 2012/13
  • Construction finished: 2015

(more…)

RMS – Residence in Sao Paulo, Brazil by Architect Affonso Risi

Thursday, November 12th, 2015

Article source: Architect Affonso Risi

House with 3767 ft² on a flat  trapezoidal ground (39,37 ft  facing a green square, 22,31ft on the back and approximately 123 ft on both lateral limits), deployed along the two sides. The front façade is oriented to the north overlooking a square with trees.

Image Courtesy © Architect Affonso Risi

Image Courtesy © Architect Affonso Risi

  • Architects: Architect Affonso Risi
  • Project: RMS -Residence in Sao Paulo
  • Location: Sao Paulo, Brazil
  • Collaborators: Arch. Samuel Dias Cabrera and Felipe de Almeida Winandy
  • Software used: 3D Max

(more…)

House at Rua Alabarda in Sao Paulo, Brazil by Affonso Risi architect

Thursday, November 12th, 2015

Article source: Affonso Risi architect  

Urban house (281 m² / 3 023 ft ²) in an upward sloping ground, narrow (9,00 m/ 32,47 ft) and long (50,00 m/164 ft).

On the ground floor, one meter (3,23 ft) higher than the street, there’s an access, garage, studio and working areas. On this level , there’s also a little pool  filled with carps, from which  a flight of stairs in reinforced concrete emerges, leading  to the upper level, with all the house accommodations: access gallery, rooms, kitchen, verandas, office, 3 bedrooms and bathrooms. The office and the third bedroom open to the upper garden at the end of the ground.

There’s a solarium over the living room and kitchen, with a lawn and a wooden deck, reached by the continuation of the stairs.

Image Courtesy © Paulo Risi

Image Courtesy © Paulo Risi

  • Architects: Affonso Risi architect
  • Project: House at Rua Alabarda
  • Location: Sao Paulo, Brazil
  • Photography: Paulo Risi
  • Collaborators: William T.S.Miyagui, Frederico Sabella & Lucas Bittar
  • Builder eng: Lineu Botta de Assis
  • Completion date: 2008

(more…)

Beach house at Ponta do Pulso, Brazil by Arch. Affonso Risi

Thursday, November 12th, 2015

Article source: Arch. Affonso Risi 

The main building, a two floor pentagon plan pavilion (258,80 m²/2 784 ft²), is almost entirely surrounded by the sea.The plan allows disposing 4 bedrooms upstairs opened as verandas to the sea landscape. The fifth vertex is an open space two stories high. The entire ground floor is also designed as a veranda with sliding glass doors.

Image Courtesy © Paulo Risi

Image Courtesy © Paulo Risi

  • Architects: Arch. Affonso Risi
  • Project: Beach house at Ponta do Pulso
  • Location: Ubatuba, São Paulo, Brazil
  • Photography: Paulo Risi
  • Software used: AutoCad
  • Collaborator: arch. Willian T.S.Miyagui
  • Builder: eng. Lineu Botta de Assis

(more…)

NO.V.A PROJECT in Rio de Janeiro, Brazil by STUDIO ARTHUR CASAS

Thursday, November 12th, 2015

Article source: STUDIO ARTHUR CASAS

Part of Italian group ENEL Brasil, aiming Rio’s 2016 Olympics and the challenges of energy and water supply in Brazil, started with the support of Rio’s universities and the city of Niteroi, the project N.O.V.A. (which stands for We Live Tomorrow Now, in Portuguese). It sought to seek alternatives to answer contemporary concerns on sustainability, flexibility and adaptation of architecture to present and future challenges. It is not about forging concepts for a theoretical future; on the contrary, the objective is to break the cliché of a house that never becomes reality and to propose concrete evolving schemes. Existing technologies and behavioral patterns guided the project and the engagement in bringing collective consciousness for problems requiring alternative social behaviors.

Image Courtesy © STUDIO ARTHUR CASAS

Image Courtesy © STUDIO ARTHUR CASAS

  • Architects: STUDIO ARTHUR CASAS
  • Project: NO.V.A PROJECT
  • Location: Rio de Janeiro, Brazil
  • AUTHOR: Arthur Casas
  • CO AUTHORS: Beto Cabariti, Rodrigo Carvalho, Cristiane Trolesi, Gabriel Ranieri, Ana Julia Sprovieri, Nara Telles, Daniel Vianna, Marilia Pelegrini and Regiane Khristian
  • COLLABORATORS: Alessandra Fuccillo, Eduardo Mikowski, Fernanda Müller, Gabriela Amaral, Lucas Takaoka and Raul Valadão.
  • PROJECT DATE: November 2014
  • PROJECT COMPLETION: May 21st 2015
  • PLOT AREA: 2500m²
  • BUILT AREA: 390m²

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon: CW910
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 210, Campbell, CA 95008
+1 (408) 850-9202 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy