Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Roman Temple of Diana in Mérida, Spain by José María Sánchez García

 
February 7th, 2012 by Sumit Singhal

Article source: José María Sánchez García

ROMAN TEMPLE OF DIANA SURROUNDINGS AND PERIMETRAL BUILDING

The project retrieves the environment of the Temple of Diana in Merida, which was the forum or the city center in Roman times.

The challenge of acting in a place with such historical and archaeological relevance has meant to work with the existing trace since the beginning, so that the finished work would recover this space from Roman times through modern language. This situation has led to conceive the architectural design not as something closed or completely defined before starting to run. On the contrary, we worked in a more flexible way, defining the rules and guidelines on how to act in this place, that is to say, the syntax of the project itself, in order to absorb all the irregularities and changes due to the archaeological findings, without losing the initial concept of the proposal. All this has been developed during five years that, with the archaeological works, the project definition and execution of the construction overlapping in time.

Images Courtesy Roland Halbe

  • Architect: José María Sánchez García
  • Name of Project: Roman Temple of Diana
  • Location: Romero Leal and Santa Catalina street, Mérida, Spain
  • Project title: Perimetral building and Temple of Diana environments. Mérida, Spain
  • Construction: November2009 – February 2011
  • Photographer: Roland Halbe, Pablo Calzado, José María Sánchez García

Images Courtesy Roland Halbe

  • Total floor area: 2158,19m2
  • Budget: 3.806.164,18  €
  • Team: Enrique García-Margallo Solo de Zaldivar, Daniel González Guerrero, Rafael Fernández Caparros, Maribel Torres Gómez, Laura Rojo Valdivielso, Francisco Sánchez García, José García-Margallo, Marta Cabezón López, Mafalda Ambrósio, Carmen Leticia Huerta, Marilo Sánchez García, Julia Ternström
  • Structural engineer: CDE Ingenieros, Gogaite S.L
  • Services engineer: ARO consultores
  • Technical architect: Ángel García Blázquez, Fernando Benito Fernández Cabello
  • Client: Consorcio Ciudad Monumental Histórico-Artístico y Arqueológica de Mérida, Consejería de Cultura – Junta de Extremadura
  • Building firm: UTE Templo de Diana (Procondal – Copcisa)

Images Courtesy Pablo Calzado

The project is solved with a perimeter piece L-shaped, with its own syntax, sewing its edge with the city and creating a large square around the temple.  This “L” is the union of the platform or high walk (which at the same level of the podium liberates the archaeological level at ground floor, allowing visitors to have a new relationship with the temple) and the structural wall (which puts in Temple value by framing and abstracting it from adjacent buildings). Between the perimeter L piece and the city, a volume in the form of hanging boxes occupy interstitial spaces accommodating commercial and cultural uses. Thus, the project, rather than a building is a raised platform, a floating structure capable of generating a new layer of city full of program.

Images Courtesy Roland Halbe

To recover the Roman trace on ground floor, the perimeter structure is placed on the edge of the site, away from the temple, thus giving the largest possible surface to the public square. The original sacred area is recovered, respecting the Roman archaeological features that are part of the sacred space: the temple, two side ponds, the cryptoportico and the Roman wall, which are now incorporated into the plaza.

Images Courtesy Pablo Calzado

The platform stands at about the same height of the podium of the temple to allow visitors to watch it as they were inside, while projecting a shadow over the square. This way the temple environment gets geometrized, making the understanding of the space clear and not interrupted by the particularities of the back part of the existing buildings. At the rear part, a volume system, flexible to changes in the perimeter, will occupy the interstitial spaces, shaping light patios that rhythmically fragment the platform´s shadow. It defines a new order of light and shade in the square by the patios between the boxes.

Images Courtesy Pablo Calzado

The materialization of the elements that build the new spaces has been studied by a contemporary interpretation of the materials that were part of the Roman space. The whole square will have an earth finishing, as it was originally. The piece in L is defined as an artificial stone, made of lime and aggregates characteristic of the place with the granite-like color of the podium of the Temple.  We don´t talk about concrete as such, but a warmer artificial stone made using materials found in the surroundings.

Images Courtesy Roland Halbe

Images Courtesy Roland Halbe

Aerial View (Images Courtesy Jose María Sánchez García)

Aerial View (Images Courtesy Jose María Sánchez García)

Conceptual model (Images Courtesy Jose María Sánchez García)

Model (Images Courtesy Jose María Sánchez García)

Model (Images Courtesy Jose María Sánchez García)

Model (Images Courtesy Jose María Sánchez García)

Tags: ,

Categories: Building, Temple




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise