ArchShowcase 
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination. Columnar Towers in Hackney, London by NL ArchitectsMarch 2nd, 2013 by Sumit Singhal
Article source: NL Architects Colville Estate, Hackney London NL architects with WHAT architecture Invited competition, 2012 Columnar Towersis a proposal for a residential development of 199 apartments in Hackney,London. The project is part of a master plan by Karakusevic Carson Architects for the regeneration of the Colville Estate. The high residential density demands of the project brief will inevitably result in large massing. Our proposal attempts to mitigate the effects of this by breaking each tower into a ‘bundle’ of seven smaller towers, or ‘columns’. Each mini-tower is formed by simple ‘stacks’ of single apartments.  Image Courtesy NL Architects
 Image Courtesy NL Architects Two towers were required with a different footprint and of different heights; one with six and the other with 5 apartments per floor. This precondition however forces the entire complex to be relatively tall. By increasing the number of units to seven per floor at the base, the opportunity is created to modify the figure.  Image Courtesy NL Architects More apartments in the lower section allow for a reduction of apartments in the higher areas: both buildings now get more slender towards the top. A ‘vertical dialogue’ is established between the columns: one grows, one shrinks… The stepped morphology that emerges helps integrate the building mass into the urban fabric. The different heights of the columns correspond with the height of buildings in the surroundings.  Image Courtesy NL Architects In anticipation to the irregular geometry of the masterplan the plan of theColumnarTowersis intricate too, kind of star-shaped, each facet accentuating the columnar arrangement. Each individual mini-tower is further defined through fenestration changes, creating a constantly changing formal rhythm to the two towers. In a way the project is an instant skyline wrapped around a building…  Image Courtesy NL Architects In order to optimize the proposal as a whole one layout has been developed that could be duplicated;TwinTowersare in principle cost-effective. To avoid visual repetition each tower footprint has been rotated 90 relative to each other. This twist, in combination with the star-plan and the stepped shape creates individual and distinctive forms. The simple trick works very well: it is quite deceptive, but the two towers are actually clones.  Image Courtesy NL Architects In increasingly dense urban environments pleasant outdoor space gets ever more important. The often unexploited neutrality of regular flat rooftops is here charged by dissolving the mass: the different heights of the ‘columns’ create rooftops on different altitudes that can be used as collective terraces; the ‘sky gardens’ will be a common, private amenity for residents.  Image Courtesy NL Architects The terraces can have different orientations, different views, different functionalities: barbeque, outdoor lounge, breakfast or high tea, ping pong, trampoline, kiddy pool or Dutch Tub. Outdoor gym + shower? Allotment garden, urban farming, giant zucchini?  Image Courtesy NL Architects The public realm between the towers is open so access from the park directly to the new interior street of the master plan is now possible. All apartments have a recessed balcony, creating an external room that can be used at any time of year, sheltered from the wind and rain. All apartments with more than one bedroom are dual aspect.  Image Courtesy NL Architects The dwellings are designed for modern, flexible city living incorporating the concept of ‘living walls’. These provide space for vertical services distribution up the building, wet spaces and storage. The internal circulation within apartments always terminates in an external view. Views open up, creating a better quality of internal space.  Image Courtesy NL Architects The structure is intended in so-called cross-laminated timber (CLT), stretching the limits of this material to the next level. CLT is a strong, lightweight material, made from a European white wood such as spruce. Like plywood, CLT consists of layers of boards glued in alternate directions. CLT forms an environmentally friendly alternative to steel or concrete.  Image Courtesy NL Architects Off-site prefabrication which CLT allows reduces the build programme considerably, producing not only lower build costs but better detailing and performance, as panels are cut from CAD information as well as a reduction of annoyance for the neighbors during construction.  Image Courtesy NL Architects  Image Courtesy NL Architects  Image Courtesy NL Architects  Image Courtesy NL Architects  Image Courtesy NL Architects  Image Courtesy NL Architects  Image Courtesy NL Architects  Image Courtesy NL Architects  Image Courtesy NL Architects  Image Courtesy NL Architects  Image Courtesy NL Architects
Contact NL Architects
Categories: Apartments, Tower |
|
|
|||||
|
|
|||||
|
|||||
email
Facebook
Twitter
RSS Feed
