Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

san mauro torinese cemetery extension in Torino, Italy by Raimondo Guidacci

 
October 19th, 2013 by Sumit Singhal

Article source: Raimondo Guidacci

The cemetery of San Mauro Torineseis extended in its west side, at the feet of the Superga hill.

The area intended for building up is defined from one side by an elevated wall and in the other side by some funeral chapels, built close to the existing cemetery.

Image Courtesy © Beppe Giardino

  • Architects: Raimondo Guidacci
  • Project: san mauro torinese cemetery extension
  • Location: Torino, Italy
  • Photography: Beppe Giardino
  • Collaborators: Francesco Negri, Nadia Saglietti
  • Area: 700 sqm
  • Year: 2010 project, 2010-2011 construction
  • Structural Engineer Stefano De Pippo (ARCHING Srl)
  • Geologist: Andrea Valente Arnaldi
  • Client: San Mauro Torinese Municipality
  • Contractor: ICF – Impresa di costruzioni Ferrara

Image Courtesy © Beppe Giardino

The project, developing the preliminary design made by the Municipality, develops a 3-floors open court building. The expanding area was divided in two lots, the part now built stands on the first one.

The strong point of this building are: the flat roof that becomes façade, as a folding surface; the series of full-height columns, lined by cor-ten steel, describing a yard; the external walls covered with cor-ten plates with staggered joints.

Image Courtesy © Beppe Giardino

The north façade is covered with Apuan cloudy marble sheets, whereas the west one is defined by different protruding elements, as stairs and balcony. All this parts perfectly slot in the second half of the building, when it will be built. The last column, on the limit of the first lot, is aligned to the ledge and it is not covered. This element ends the layout proposed and signs the joint between two different building phases.

Image Courtesy © Beppe Giardino

The columns surrounding the court look like totally independent from the construction, emphasizing the monumental nature of the building. Indeed only a steel plate connects each column with the floor slabs.

Each column is covered for 3 sides with a folded cor-ten steel sheet, with different section according to the height.

Image Courtesy © Beppe Giardino

A tick railing made of zinc-coated rods is fitted between the slab and the columns, highlighting the estrangement between columns and floors.

The construction is totally built in finished concrete, plates of sandCarraramarble are used for the graves, fixed to a steel structure.

In all the court, the future graveyard, grey gravel is set down. Three cypresses mark the court entrance and other nine are taking the place of second part of the building, keeping the same distance between each other as the colonnade.

Image Courtesy © Beppe Giardino

Image Courtesy © Beppe Giardino

Image Courtesy © Beppe Giardino

Image Courtesy © Beppe Giardino

Image Courtesy © Beppe Giardino

Image Courtesy © Beppe Giardino

Image Courtesy © Beppe Giardino

Image Courtesy © Beppe Giardino

Image Courtesy © Beppe Giardino

Image Courtesy © Raimondo Guidacci

Tags: ,

Category: Cemetery




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise