Open side-bar Menu
 ArchShowcase
Sanjay Gangal
Sanjay Gangal
Sanjay Gangal is the President of IBSystems, the parent company of AECCafe.com, MCADCafe, EDACafe.Com, GISCafe.Com, and ShareCG.Com.

747 Wing House in Malibu by David Hertz Architects

 
December 14th, 2013 by Sanjay Gangal

Article source: David Hertz Architects

This project exists on a 55-acre property in the remote hills of Malibu with unique topography and panoramic views looking out to a nearby mountain range, a valley, and the Pacific Ocean with islands in the distance. In searching for inspiration, I imagined a roof structure that would allow for a un-obstructed view of the mountain range and distant views.The client, a woman, requested curvilinear, feminine shapes for the building.

Image Courtesy © CARSON LEH

  • Architects: David Hertz Architects
  • Project: 747 Wing House
  • Location: Malibu, U.SA
  • Photography: David Hertz Architects, CARSON LEH, DOUGLAS HILL, LAURA DOSS
  • Software used: ArchiCAD

Image Courtesy © CARSON LEH

The progenitor of the building’s form was envisioned as a floating curved roof. It soon became apparent, that in fact, an airplane wing itself could work. In researching airplane wings and superimposing different airplane wing types on the site to scale, the wing of a 747, at over 2,500 sq. ft., became an ideal configuration to maximize the views and provide a self supporting roof with minimal additional structural support needed.

Image Courtesy © David Hertz Architects

By incorporating many of the previous pads and retaining walls we sought to minimize significant grading and subsequent impacts to the existing topography and landscape. The wing structures are conceived to be positioned to float on top of simple concrete walls that are cut into the hillsides.

Image Courtesy © David Hertz Architects

The floating roofs will derive simple support from steel brace frames, which will attach to strategic mounting points on the wing where the engines were previously mounted. Frameless, structural self-supporting glass will create the enclosure from the concrete slab on grade into the wing as roof.

Image Courtesy © David Hertz Architects

The scale of a 747 aircraft is enormous – over 230 feet long, 195 feet wide and 63 feet tall with over 17,000 cubic feet of cargo area alone and represents a tremendous amount of material for a very economical price of less than $50,000 dollars.  Additionally, incorporating prefabricated lightweight components off site and delivering them to the remote site via helicopter, although at a cost of $8,000 hr. became realistic after considering the cost of getting traditional labor and material to the site.

Image Courtesy © David Hertz Architects

After visiting the planes and verifying with the building department that there is nothing specifically prohibiting the use of an airplane wing as a roof, we began to explore the actual structure of the wings in particular and examined if other components might be used for additional accessory structures on the property. Although, we did find out that we have to register the roof of the house with the FAA (Federal Aviation Administration) so pilots flying overhead do not mistake it as a downed aircraft.

Image Courtesy © David Hertz Architects

As we analyzed the cost, it seemed to make more sense to acquire an entire airplane and to use as many of the components as possible, like the Native American Indians used every part of the buffalo. Therefore, the property is to consist of several structures all made with components and pieces of a Boeing 747-200 aircraft.

Image Courtesy © DOUGLAS HILL

The Main Residence uses both of the main wings as well as the 2 stabilizers from the tail section as a roof for the Master Bedroom. The Art Studio Building will use a 50-foot long section of the upper fuselage as a roof, while the remaining front portion of the fuselage and upper first class cabin deck will be used as the roof of the Guest House.

Image Courtesy © DOUGLAS HILL

The lower half of the fuselage, which forms the cargo hold, will form the roof of the Animal Barn. A Meditation Pavilion will be made from the entire front of the airplane at 28 feet in diameter and 45 feet tall; the cockpit windows will form a skylight. Several other components are contemplated for use in a sublime manner, which include a fire pit and water element constructed out of the engine cowling.

Image Courtesy © DOUGLAS HILL

Environmental Features

Wing house, as a work in progress, has many plans for the implementation of environmental features. The sole fact that an entire 747 is being used to construct a main residence and 6 ancillary structures, is environmentally sustainable in that the material being used is 100% post-consumer waste, and the plane has already been engineered so that additional material and man power are not necessary as they would be if the structure was to be built from the ground up. Solar power, radiant heating and natural ventilation will be incorporated as well as high performance heat mirror glazing.

Image Courtesy © David Hertz Architects

Image Courtesy © David Hertz Architects

Image Courtesy © David Hertz Architects

Image Courtesy © David Hertz Architects

Image Courtesy © David Hertz Architects

Image Courtesy © David Hertz Architects

Image Courtesy © David Hertz Architects

Image Courtesy © David Hertz Architects

Image Courtesy © David Hertz Architects

Image Courtesy © David Hertz Architects

Image Courtesy © David Hertz Architects

Tags: ,

Categories: ArchiCAD, House




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise