Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

New Technologies Training Center in Santiago de Compostela, Spain by Francisco Mangado

 
April 11th, 2014 by Sumit Singhal

Article source: Francisco Mangado

The proposal for the Center for New Technologies of Santiago de Compostela is based on two essential ideas. The first one springs from the conception of the place and its process of topographic adaptation, and the second entails a sense of efficiency. Efficiency having to do in this case both with the speed in which the project must be executed and with the fact, strictly functional, that the resulting building may need to undergo variations in program over the years.

Image Courtesy © Roland Halbe

  • Architects: Francisco Mangado
  • Project: New Technologies Training Center
  • Location: Santiago de Compostela, Spain
  • Photography: Roland Halbe
  • Construction area: 3.300,00 m2
  • Budget: 3.100.000,00 €
  • Year of contest: 2004. First Prize of Competition
  • Year of project: 2004.
  • Constrution: noviembre 2005 – diciembre 2007
  • Client: Xunta de Galicia
  • Collaborators: Ignacio Olite, Idoia Alonso, Francesca Fiorelli, Arina Keysers, Ibón Vicinay
  • Structural engineering: Jesús Jiménez Cañas. Alberto López. NB35
  • Instalations engineering: Obradoiro Enxeñeiros
  • Cuantity surveyor: José Antonio Cerviño, Fernando Oliván.
  • Contractor: Acciona Infraestructuras
  • Awards: Second Prize ATEG Galvanización 2008.

Image Courtesy © Roland Halbe

The building is laid out in two parallel pieces separated by a large glazed courtyard. The first piece rests on the higher area of the site, more dense and solid, and to a certain extent is transformed into an element that retains the topographical unevenness and houses the access as well as all the uses which may be considered ‘complementary’ to the academic and other general activities of the building (control, administration and installations).

Image Courtesy © Roland Halbe

The second piece goes up on the lower area of the terrain, oriented towards the south, light and modular, orderly and smoothly gathering all the classrooms and workshops in such a way that these can be subdivided or brought together in accordance with the different needs and circumstances. Both pieces are connected by a series of bridges, more or less wide, which hover over a landscaped surface filled with trees.

Image Courtesy © Roland Halbe

A wider piece (supported off by the two prisms and located next to the entry to provide direct access from the exterior) accommodates the assembly hall. The surrounding terrain thereby manages to sneak into the building in the form of an interior garden; taking on an essential role as organizational point of reference, ordering all the circulations within the complex, and ensuring, especially from the upper levels, views over the nearby monastery of Gonxo.

Image Courtesy © Roland Halbe

The structure entails the most important constructional analysis. The north volume is dense and the granite-clad concrete walls, some of them acting as retaining walls, play a leading role. But the south volume, lighter, is the one in charge of seeking a greater formal expressiveness. Profiles built with thin sheet, galvanized and later screwed on like a meccano, defying slenderness limits, are built independently as an ‘outer’ shell upon which, once executed, the interior slabs rest. A clear tribute to Jean Prouvé.

Image Courtesy © Francisco Mangado

Image Courtesy © Francisco Mangado

Image Courtesy © Francisco Mangado

Image Courtesy © Francisco Mangado

Tags: ,

Category: Training centre




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise