Nihat Bey Apartment Building by MANCO ARCHITECTS INC.

Article source: MANCO ARCHITECTS INC.

The project was designed to reconstruct Nihat Bey Apartment proven to be not structurally resistant against an earthquake and needs to be demolished according to the Urban Regeneration Law.

Each one of the 12 units to be included in the new building were individually designed according to the special needs of their owners.

Image Courtesy © MANCO ARCHITECTS INC.

• Architects: MANCO ARCHITECTS INC.
• Project: Nihat Bey Apartment Building
• Software used: AutoCAD LT, SketchUp and V-Ray

Image Courtesy © MANCO ARCHITECTS INC.

The roof of the building was designed as a common terrace garden including kitchen and WC spaces. The backyard was also planned as a common garden cascading towards the neighboring German Consulate.

The floor to ceiling windows of the front façade were positioned towards the view of the Bosphorus Bridge whereas the lower ones were shifted to allow more daylight in.

Image Courtesy © MANCO ARCHITECTS INC.

Stain & impact resistant grey composite stone, as well as compact laminate panels with two different tones of wood that refer to the neighboring historic buildings were selected as façade cladding materials.

A dynamic façade effect was achieved with the contrast of material textures and the tilting positions of windows. The same design concept was also applied to the back façade.

Image Courtesy © MANCO ARCHITECTS INC.

Image Courtesy © MANCO ARCHITECTS INC.

Image Courtesy © MANCO ARCHITECTS INC.

Image Courtesy © MANCO ARCHITECTS INC.

Image Courtesy © MANCO ARCHITECTS INC.

Image Courtesy © MANCO ARCHITECTS INC.

Image Courtesy © MANCO ARCHITECTS INC.

Image Courtesy © MANCO ARCHITECTS INC.

Image Courtesy © MANCO ARCHITECTS INC.

Categories: Apartments, Autocad, Building, SketchUp

This entry was posted on Friday, May 23rd, 2014 at 1:48 am. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.