Bhai Tech in Padova, Italy by Nicolli

ArchShowcase

Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Bhai Tech in Padova, Italy by Nicolli – technologies for architecture

March 27th, 2016 by Sumit Singhal

Article source: Nicolli – technologies for architecture

A new technology centre for automotive industry research, analysis and development in Mestrino, Padua, with a space where is located the Formula 1 pilot training driving simulator and the development area of performance racing cars.

Image Courtesy © Nicolli – technologies for architecture

Architects: Nicolli – technologies for architecture
Project: Bhai Tech
Location: Mestrino, Padova, Italy
Project team: Danilo Turato, Arianna Gobbo, Filippo Fradellin and Enrico Rispo architects with Stefano Paludetto engineer
Building area: 2.800 sqm

Image Courtesy © Nicolli – technologies for architecture

This Alucobond cladding façade, performed by Nicolli, is composed by more than 350 ice panels, all custom cut in irregular shapes. This coating has been properly studied with accurate graphic simulations, in order to harmonize it with the varied facets of the architectural office block.

Image Courtesy © Nicolli – technologies for architecture

The overall design is structured on the movement of the façade geometries. It is marked by cuts of the windows and of the glasses, which are also designed so as to follow the polygonal facade. In the corners they join with simple sealing.

Image Courtesy © Nicolli – technologies for architecture

This architecture is designed with great attention to energy saving, due to the presence of photovoltaic panels, high-performance glazing, solar shading and LED lights. It thus appears in tune with his Italian technological excellence content.

Image Courtesy © Nicolli – technologies for architecture

Cladding technical summary:

Alucobond façade cladding, hi-performance mullion-transom façade, windows and doors with integrated extruded sun blade and Schuco Tip-Tronic automation system.

Image Courtesy © Nicolli – technologies for architecture

Contact Nicolli - technologies for architecture

Tags: Italy, Padova

Categories: Research & Development Centre, Technology

This entry was posted on Sunday, March 27th, 2016 at 4:12 am. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.