Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Kinosaki Residence in Hyogo, Japan by PUDDLE Inc.

 
November 25th, 2016 by Sumit Singhal

Article source: PUDDLE Inc.

The Harmony between Architecture and Belongings across Time: A Former “Kenban” Turned Into a Home.

Kinosaki Onsen, located in Hyogo Prefecture, is one of the leading onsen areas in Japan, with a history of over 1300 years. Just a short path in from the main street of this onsen city is a small stream, along which stands a former “kenban” (a place for geisha performers from the onsen to gather). Built 50 years ago, and surrounded by a bamboo forest, we converted/renovated this building into a residence.

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

  • Architects: PUDDLE Inc.
  • Project: Kinosaki Residence
  • Location: Kinosaki, Hyogo, Japan
  • Photography: Takumi Ota
  • Lead Architects: Masaki Kato
  • Other participants (eg. collaborators, clients, consultants, etc): Sodenaga-Komuten (constractor)
  • Gross Built Area (square meters or square foot): 276 m2
  • Completion Year: 2016

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

The owner, who is originally from Hyogo Prefecture returned back to his hometown from Tokyo, and because of his friendly and caring nature, friends and acquaintances – from both near and far – often visit to have heart-to-heart conversations, or to talk about common interests, such as art. We thought it would be a perfect reflection of their personality to design the kitchen at the center, to be used as the main area for such discussions. And with a vast collection of treasured belongings (furniture, art, clothing, and other furnishings), we wanted these to surround the kitchen – this is the point from which we started our design work.

It also helped that I know the owner personally and consider him a good friend, so we are familiar with his collection and it’s importance to him and his family.

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

The dynamic elements of the third floor include the kitchen at its center, two dining areas, a slightly raised living area designed on a former performance stage, and a studio for the owner’s wife – who is a manga artist – all in balance with one another in the warm, open space. A large beam made of chevron-shaped boards, which is part of the existing structure, surrounds this entire space. We only discovered this beautiful beam structure after deconstructing the ceiling, and to be able to expose it for the first time in 50 years was a very exciting detail to add.

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Finding the balance between these modest, yet important elements – an existing structural beam and the owner’s personal belongings – was crucial.  To find a way to privilege and acknowledge both, highly influenced all the design details of the entire space.

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

One example is the choice of flooring – its width and coloring. And another example is that we avoided the use of white for any paint coating, but instead, selected four different tones of gray. The effect we were aiming for was to accentuate the existence of the beam structure, and at the same time, to give the entire space a sense of depth.

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

In contrast, the second floor was designed to have a more passive function, with the entrance, bathroom, and bedrooms at its center. The entrance is purposely located on this floor in order to give a sense of anticipation towards the floor above.

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Because of the bamboo forest surrounding this residence, we needed to consider the problem of humidity. Thus, for the master bedroom, we decided to use diatomite earth from Hokkaido as the finish for the walls and ceiling, as this material has natural humidity adjustment properties.

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

And whilst decision to use diatomite earth was of course to solve the humidity problem, there was an additional, more meaningful reason for this decision.  The construction company for this project is operated by the owner’s high school friend. The company first started as a small team of skilled plasterers, so we were very much interested in incorporating their skills in our design. So, like the finish to the master bedroom, the second floor consists of many other areas with a “plastering” type finish (by coating). The bathroom sink, for example, adopts this concept of “coating”, by finishing the veneer with a thin layer of FRP resin, applied at the hands of a skilled plasterer.

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Finally, the ground floor is currently left untouched after deconstruction, exposing its skeleton structure. This space will remain in this state, free to be designed and used in any which way, as the owner continues to meet new people, and encounter new things with which to fill this space, in the near future and for a long time to come.

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

Contact PUDDLE Inc.

Tags: ,

Categories: House, Residential




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise