Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

The Gate in Busan, Korea by Hyunjoon Yoo Architects

 
January 19th, 2017 by Sumit Singhal

Article source: Hyunjoon Yoo Architects

I was surprised twice when I first visited the Daekyoung Factory. The first surprise was the beautiful scenery of the mouth or the river of the Nakdong River, and the second surprise was that the beautiful scenery could not be seen at all from the factory complex. There were three buildings in the complex, with two buildings lined up on parallel lines, making a rectangular plaza. The plaza was busy, with many workers passing by. The third building was placed perpendicularly with the plaza, blocking the scenery towards the sea. I felt sorry for the factory workers, who are so close to the beautiful scenery, but could not even see it.

Image Courtesy © Park Young-Chae

Image Courtesy © Park Young-Chae

  • Architects: Hyunjoon Yoo Architects (Yoo Hyunjoon)
  • Project: The Gate
  • Location: 1521-4, Dadae-dong, Saha-gu, Busan, Korea
  • Photography: Park Young-Chae
  • Design Team: Heo Jinsung, Kim Jihyun
  • Client: Daekyoung
  • Structure: R.C.
  • Structural engineer: Seum
  • Construction: Young Rim
  • Mechanical engineer: Min Sung engineering
  • Electrical engineer: Hyeob-In
  • Building to land ratio: 54.46%
  • Floor area ratio: 58.7%
  • Site area: 8205.7m2
  • Building area: 133.6m2
  • Gross floor area 247.89m2
  • Design period: Aug.2015 – Jan.2016
  • Construction period: Jan.2016 – Jun.2016

Image Courtesy © Park Young-Chae

Image Courtesy © Park Young-Chae

The client wanted a conference room, a studio, and an office for seven workers. He also had a plan to purchase the land on the third factory building and build a new one. We asked the client if the building had to be a single mass. He said it could be divided. This is where we found the clue to the solution. The new factory building was divided into two massed, emphasizing the parallel arrangement of the other buildings, and the plaza in between was opened out towards the see, as in Louis Kahn’s Salk Institute. The office building will be built in the plaza, but the first floor is made with high piloti to open up the view towards the sea as much as possible. The circulation is coordinated in a counter-clockwise direction wrapping up the building in order to allow the users to experience the full scenery. Because of these design decisions, the structure of the building ended up having each floors shifted from the other. Because this building had to sit on a site covered Ascon, exposed concrete was used as the main exterior material.

Image Courtesy © Park Young-Chae

Image Courtesy © Park Young-Chae

Image Courtesy © Park Young-Chae

Image Courtesy © Park Young-Chae

Image Courtesy © Park Young-Chae

Image Courtesy © Park Young-Chae

Image Courtesy © Park Young-Chae

Image Courtesy © Park Young-Chae

Image Courtesy © Hyunjoon Yoo Architects

Image Courtesy © Hyunjoon Yoo Architects

Image Courtesy © Hyunjoon Yoo Architects

Image Courtesy © Hyunjoon Yoo Architects

Image Courtesy © Hyunjoon Yoo Architects

Image Courtesy © Hyunjoon Yoo Architects

Image Courtesy © Hyunjoon Yoo Architects

Image Courtesy © Hyunjoon Yoo Architects

Tags: ,

Categories: Building, Factory




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise