“Tea House in Li Garden” in Shanghai, China by Atelier Deshaus

Article source: Atelier Deshaus 

The Tea House is located in an approximately 110 m² little garden, where a tall paulownia stands and covers our little building under its huge crown. Before that, this small place could not be seriously called garden, for it was something residue left by two staircases connecting to the neighboring office. Therefore, how to make the Tea House occupy this space at a minimum level so as to form a garden, becomes a key point in the design process.

Image Courtesy © Tian Fangfang

• Architects: Atelier Deshaus
• Project: Tea House in Li Garden
• Location: Longteng Avenue Xuhui Area, Shanghai, China
• Photography: Tian Fangfang and Liu Yichun
• Client: Exception
• Sturcture Engineer: structure AND architecture OFFICE
• Design Team: Liu Yichun, Shen Wen, Wang Weishi
• Structure design: Zhang Zhun
• Landscape Design: July Cooperative Company
• Gross Floor Area: 19.0m²
  
• Design Period: 2015.09-2015.12
• Completion: 2016.06

Image Courtesy © Tian Fangfang

We decide to put the building in the northwest corner where the paulownia stands, clinging to the back wall. In doing so, the Tea House would enjoy a relatively complete and large courtyard towards the gate. While at the same time, we cut the volume facing the paulownia into an “L” shape, thus forming a tiny backyard. This backyard functions as an outdoor room complementary to the Tea House. And the thick trunk of the paulownia, almost 90cm in diameter, also becomes a lively actor of the space. In order to link the building to the garden without disturbing it, we add three horizontal cantilevers at different heights: the one at 45cm high works as a bench encircling the building both inside and outside; the one at 1.8m high extends the interior space into the courtyard and marks the human scale of the corridor; the roof is the last cantilever. It covers an area of 40 m² with a ground floor of only 19 m². It redefines the outer space in the south, north and west, allowing the green space in the garden permeate inside and vice versa.

Image Courtesy © Tian Fangfang

Image Courtesy © Tian Fangfang

In order to hold this typical perception of a tiny, light Tea House, we choose to use 60mm steel tube in square cross section all over the building. While satisfying structural needs, this element could also have a chance to participate in the formal composition. It is the structural element; meanwhile, it adapts itself to the scale of the furniture, thus establishing a close relationship with human body. The roof is made of 8mm steel board. Its insulation board is fixed by the anti-ribbed steel panel, which is meant to keep the roof smooth. Considering the lighting system and thermal insulation, we make a suspended ceiling hiding the structural beam, while putting the air conditioning system under the floor.

Image Courtesy © Tian Fangfang

Image Courtesy © Tian Fangfang

Image Courtesy © Tian Fangfang

Image Courtesy © Tian Fangfang

Image Courtesy © Tian Fangfang

Image Courtesy © Liu Yichun

Image Courtesy © Liu Yichun

Image Courtesy © Liu Yichun

Image Courtesy © Liu Yichun

Image Courtesy © Liu Yichun

Image Courtesy © Liu Yichun

Image Courtesy © Atelier Deshaus

Image Courtesy © Atelier Deshaus

Image Courtesy © Atelier Deshaus

Image Courtesy © Atelier Deshaus

Image Courtesy © Atelier Deshaus

Image Courtesy © Atelier Deshaus

Tags: China, Shanghai

Categories: House, Interiors, Residential

This entry was posted on Thursday, February 23rd, 2017 at 6:58 am. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.