Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Zilverzijde – Social Housing in The Hague, The Netherlands by Atelier Kempe Thill architects and planners

 
May 9th, 2017 by Sumit Singhal

Article source: Atelier Kempe Thill architects and planners

Radical Tabula Rasa

In 2006, Atelier Kempe Thill is commissioned to design Block 10 in the Moerwijk neighborhood of The Hague with eighty-eight apartments and twenty-seven terraced houses as the result of a negotiation procedure by Vestia, the largest building corporation in the Netherlands.

Moerwijk is a typical restructuring area with residential buildings from the nineteen-sixties, as also exist in many large cities in the Netherlands. Also here, the city and housing corporations agreed on the comprehensive demolition of the entire area rather than renovation of the existing buildings.

Image Courtesy © A2 Studio Rotterdam

  • Architects: Atelier Kempe Thill architects and planners
  • Project: Zilverzijde – Social Housing
  • Location: Erasmusweg 106 – 178, Wildenborgstraat, The Hague, The Netherlands
  • Photography: A2 Studio Rotterdam
  • Client: Ceres / Vestia Den Haag Zuid-West
  • Team Atelier Kempe Thill: André Kempe, Oliver Thill, Teun van der Meulen with Rafael Alencar Saraiva, Marcel Geerdink, Anja Mueller, Peter Graf, Stefanie Diwischek, Andris Rubenis, David van Eck
  • Urban planner: KCAP, Rotterdam / The Hague department urban planning
  • Supervisor: Ruurd Gietema / Frank Weijzen

Image Courtesy © A2 Studio Rotterdam

  • Consultants:
    • Building Physics: Cauberg Huygen raadgevende ingenieurs bv, Rotterdam
    • Structural Engineer: ABT bv, Delft
    • Service Engineer Installations: ABT bv, Delft
    • Tender documents: Adviesbureau Both, Haarlem
    • Quantity Surveyor: VGG Adviseurs, Capelle a/d IJssel
  • Building contractor:
    • General Contractor: Dura Vermeer Leidschendam bv, Leidschendam
  • Total building budget: € 9.478.500,- (excl. VAT)
  • Site area: 7.471 m2
  • Building size: 9.132 m2 gross floor area (excl. parking space)
  • Building volume: 30.388 m3 gross volume
  • Building process Phase1: Sept 2010 – Jan 2012
  • Building process Phase2: 2014 (expected)

Image Courtesy © A2 Studio Rotterdam

Image Courtesy © A2 Studio Rotterdam

Commissioned to create the new urban development plan required was the firm KCAP, whose project is fundamentally based on the existing street and block structure. What is distinguishing here—as in the majority of comparable planning situations—is the fact that it is not possible to change the street grid due to the new necessary infrastructure, as well as the fact that such a large-scale operation would have to be realized in smaller steps of 150 to 250 residences. For this reason, the new development adheres nearly exactly to the old building lots, but with a substantial difference: the depth of the buildings has been increased from nine meters to approximately thirteen, and a new mix of apartments and terraced houses is created in place of the original development, consisting exclusively of apartments. The apartments thus stand on the edge of the area and form an “urban border,” while the terraced houses are located in the more intimate interior of the grid.

Image Courtesy © A2 Studio Rotterdam

Image Courtesy © A2 Studio Rotterdam

KCAP originally envisioned retaining two of the three-story apartment blocks in the heart of the area as a witness to the original urban development plan of Willem Marinus Dudok. Based upon feasibility studies conducted by the housing corporation, these last two structures were, however, also approved for demolition in the end. Suitable renovation with the combining of apartments as well as the corresponding acoustics and energy efficiency would have exceeded the maximum budget. The ground plan and the building structure were also not appropriate for the planned changes.

Image Courtesy © A2 Studio Rotterdam

Image Courtesy © A2 Studio Rotterdam

The impressive planting of the courtyards and the carefully composed trees on the streets (magnificently blooming ornamental species) were also sacrificed to the bulldozer, so that after fifty years everything was virtually started again from scratch on the basis of a consistent tabula rasa—and indeed with the fascination for the virgin, bare sand area that is so typical for the Netherlands, and in which one is able to dream up new buildings like a new beginning of life.

Image Courtesy © A2 Studio Rotterdam

Image Courtesy © A2 Studio Rotterdam

What is moreover remarkable is the economic logic of such a large-scale operation, which ultimately makes the entire current production of residential buildings in the Netherlands seem like an increase in luxury. Such an operation is only then feasible when approximately two times the amount of living space is built up once again. Finally, however, only the same number of residences as before will be built despite a doubling of the area. In addition, approximately only half the number of people will live in these new apartments compared to fifty years ago.

Image Courtesy © A2 Studio Rotterdam

A Collective without Collectiveness

The new design for Block 10 is conceived by KCAP as meaning an apartment development along Erasmusweg, which is the main street leading to downtown The Hague, and also an area of terraced-house development situated behind the apartments. The buildings along Erasmusweg serve as a noise barrier for the surrounding area to the back while also functioning as a city boundary.

According to Atelier Kempe Thill’s analysis regarding both the required parking space and storage space for the apartments, which should also be situated on the ground floor, it becomes clear that it would be necessary to assume that the space between the two buildings would be filled completely with parking space. Building an underground parking garage would be uneconomical due to the high water table. As an alternative (and similar to the residential building project in Amsterdam-Osdorp), Atelier Kempe Thill proposes covering the parking space with a green roof deck, which it envisiones as a terrace for neighboring apartments as well as a communal area with opportunities for children to be able to play. Generous openings in the deck are planned in order to make it possible to ventilate the garage naturally. Building such a large residential complex from scratch thus offers the chance to create a generous, collective inner courtyard.

Image Courtesy © A2 Studio Rotterdam

The discussions regarding this idea that Atelier Kempe Thill conducts with the housing corporation are worth noting. It quickly becomes clear in the meetings with Vestia that the combination of terraced houses with apartments would lead to social differences between the residents, which would make any shared use of the courtyard inconceivable. Vestia is of the opinion that second- and third-generation Turkish and Moroccan immigrants who have achieved prosperity would live in the terraced houses, that large, first generation families from Turkey and Morocco would probably live in the subsidized maisonette apartments, and that retired Dutch citizens would prefer the upper floors. According to this assessment, none of the target groups would be interested in sharing a single courtyard with the others. The design desired is thus one that guaranteed a generous coherence optically while clearly separating the residents of the two sections spatially, since they would otherwise—according to the conjecture—only disturb each other.

Image Courtesy © A2 Studio Rotterdam

Access balcony Remains Access balcony

Residential housing development in the Netherlands in the nineteen-sixties and early seventies, for instance the well-known Bijlmermeer in Amsterdam, is mostly characterized by long, anonymous balconies for accessing the individual residences. This form of access is by far the most economical since the passageway in the form of a prefabricated slab of concrete need only be suspended on the exterior of the building structure without actually being part of the isolated building structure.

Image Courtesy © A2 Studio Rotterdam

Due to the anonymity of an access balcony and the fact that the residents are completely exposed to the weather before reaching the elevator or stairway, the access balcony is—especially when it is quite long—one of the main criticisms expressed with respect to the residential building architecture of late modernism. Atelier Kempe Thill begins its work on the design of the new apartment building with this awareness and proposed various two-story apartment typologies with other forms of access. The housing corporation, however, come to the conclusion that only one-story apartments are desired. Two-story maisonette apartments need be reduced to the absolute minimum since this target group would clash with the retired Dutch residents, who must become accustomed to old age and infirmity. One-story apartments, which are per definition wheelchair-accessible, could, however, only be accessed in the given situation by means of an access balcony, which automatically results in a building typology that is nearly exactly the same as that which was so severely criticized in the sixties. This situation was, nevertheless, accepted. In order to upgrade the access balcony socially and architecturally, Atelier Kempe Thill proposes combining the actual balconies of the apartments directly with the access by enlarging it to some extent. This combination is particularly appreciated in the case of apartments for the “55 plus” generation since it facilitates more social contact.

Image Courtesy © A2 Studio Rotterdam

Panoramawoning or Doorzonwoning

The apartment size for the standard apartments desired by the housing corporation equates to ninety-five square meters with two bedrooms. The dimension between construction axes that allows the apartments and the parking garage to be coordinated with each other consists of 7.2 meters. Almost all interior dimensions of the rooms, up to the positions of sinks and the like, are precisely defined by the Woonkeur certification system, which generally applies to subsidized housing construction in the Netherlands. Within this basic plan, only two possible apartment layouts arise, quasi in autopilot: first, the doorzonwoning with the living room traversing the building with one bedroom on each façade. The second option is the panoramawoning, in which the living room completely takes up one side while the other side is occupied by the two bedrooms. Here, Vestia decides on the panorama variant, which provides the building with a generous living room and a view of the park-like Erasmusweg with its stream. This constellation made it possible to design a glass façade for all of the living rooms that spans the complete height of the floor with 4.5-meter-wide fixed glazing and a 2.5-meter-wide sliding window. The corner apartments have been given glazing in the living room, which extends around the corner. All of the glasswork extends somewhat over the ceilings of the floors at the top, which means that curtains can be hung in the interstice that is created. The window connections are minimized at the bottom as well as on the sides in order to achieve a comprehensive visual opening of the interior toward the outside. The bedrooms facing the side where the access balcony is located can also be provided with generous windows despite the restricted budgetary framework.

Image Courtesy © A2 Studio Rotterdam

“Golden Flat”

The outer appearance of the building complex is defined by the subtle, golden “champagne” hue of all metal construction elements in the external façade, which also strives to form a connection with the atmosphere of other residential areas in The Hague. The aluminum window frames and extruded cover plates as well as the fine-ribbed corrugated sheet metal are executed in a subtle gold color. The goal in doing so is to lend the building complex a discrete touch of nobility and to consciously break the stigma that social housing construction not only has to be cheap but also has to look cheap. This effect is particularly important on the upper façade, which due to the limited financial framework only allows for a few windows and is thus rather closed.

Image Courtesy © A2 Studio Rotterdam

On the two main façades facing Erasmusweg and Wildenborghstraat respectively, the glazing dominates the façade. This gives the complex a distinctly public character toward the outside, while the bedrooms characterize the private character toward the inside. The large window glazing has a harmonious relationship to the overall size of the building, which means that its overall scale can easily be comprehended by viewers.

The detailing of the two façades represents a further development and refining of the projects in Amsterdam-Osdorp and Zwolle. This situation is particularly noteworthy since it was possible to achieve a very large reduction in sound comprising more than twenty-eight decibels as a result of the façade along Erasmusweg, a situation that reflects heightened requirements for all the profiles, connections, and the glass.

Image Courtesy © A2 Studio Rotterdam

The dimensions of the glazing are even larger here than in the previous projects and the coverings between the window frames even narrower—with the goal of making the panes and thus the building as a whole appear even more generous. The coverings here are no longer flat but instead consist of extruded aluminum profiles fabricated especially for the project in order to create a tauter image in every detail. And to give the building even more lightness, the panes of the corner windows have no corner profile and are only glued.

The maisonette apartments can be accessed from the street by means of sliding doors. The mailboxes are executed in their glazing as integrated sound-insulated flaps.

Image Courtesy © Atelier Kempe Thill architects and planners

It was possible to address Vestia’s concerns regarding the ease of using the lifting/sliding doors in the living rooms, whose panel weight exceeds 250 kilograms, using a model with a scale of 1:1. With this model, both the impermeability to wind and rain and the ease of operation for older individuals is tested by three potential residents.

In summary, it is possible to say with respect to the façade that within the very limited cost framework, the deviations from customary standards were only possible as a result of a consistent, Fordist manner of design with as few deviations as possible. This is based on the belief that, by concentrating on just a few details and realizing them critically with respect to all technical questions, it is possible to achieve not only convincing results but also technical innovation as well. For mass housing projects in the Netherlands, it is by no means possible to confirm any purported economic equivalence between a “mass-customization strategy” with many individual adaptations and “Fordist consistency.” With the strategy of serial repetition, it is also much easier to address the increased risk and the reduced leeway in design that is connected with it, above all in the case of such large projects, and to counter clients’ greater aversion to risk with persuasive arguments.

Image Courtesy © Atelier Kempe Thill architects and planners

The Block 10 complex moreover has a future-oriented energy concept: in addition to various standards, such as heat recovery, mechanical ventilation, and well-insulated façades with sun-protection coating, which are customary for Atelier Kempe Thill, all of the heating energy is obtained by means of a geothermal system.

Image Courtesy © Atelier Kempe Thill architects and planners

ATELIER KEMPE THILL architects and planners, Rotterdam

Atelier Kempe Thill architects and planners was founded in 2000 by the two German architects, André Kempe (’68) and Oliver Thill (’71), following their Europan 5 winning proposal of 300 dwellings in Kop van Zuid, Rotterdam. While this project didn’t result in a commission, the office survived the recession of 2002-2004 and has been able to position itself well within the Dutch architectural scene. In the last 12 years the practice has grown from a ‘two-man band’ to a stable, medium-sized office with around 20 employees.

Image Courtesy © Atelier Kempe Thill architects and planners

The office’s range of work has systematically broadened since its foundation. Beginning with collective housing and small public building commissions, the practice portfolio has developed to include large renovation, infrastructure and urban design projects. Single-sided specialisation and the consequent limitations this brings have been avoided through the wide diversity of commissions; as a result the practice is also more economically stable. Since its foundation, Atelier Kempe Thill has tried not to limit itself to the Netherlands, but instead establish itself within the wider European market. Through its participation in over 90 international competitions, the office has acquired commissions not only in the Netherlands, but also Germany, Belgium, France, Morocco, Egypt and Austria.

Atelier Kempe Thill is becoming increasingly well known in architectural circles. In the last 12 years the office has appeared in around 500 publications worldwide, amongst which were two monographs. In addition, the office’s partners have given over 130 lectures. This professional recognition enables the office to acquire increasingly complex projects and compete with the larger, more commercial practices. 

Image Courtesy © Atelier Kempe Thill architects and planners

Image Courtesy © Atelier Kempe Thill architects and planners

Image Courtesy © Atelier Kempe Thill architects and planners

Image Courtesy © Atelier Kempe Thill architects and planners

Tags: ,

Categories: Apartments, Building, Housing Development, Residential




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise