Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

House and studio for an artist in Santiago, Chile by Planmaestro Arquitectos

 
September 21st, 2017 by Sumit Singhal

Article source: Planmaestro Arquitectos 

The requirement was a building that would accommodate an artist’s studio and residential space for occasional use as a weekend house. The 1.500 sqm site is located in Peñalolén, a suburban district with low construction density, and neighbors some undeveloped sites. This condition leaves the building very exposed to its surroundings, so the client required that the project would limit the exposure of the interior spaces and provide privacy. The project also had to be capable of becoming an exclusively residential building at a future time, so it needed spaces to allow new uses and an extension to be planned.

Image Courtesy © Mathias Jacob

  • Architects: Planmaestro Arquitectos
  • Project: House and studio for an artist
  • Location: Peñalolén, Santiago, Chile
  • Photography: Mathias Jacob
  • Structural engineer: Ruiz Saavedra Ingenieros
  • Construction: Julio Hernández
  • Area: 135 sqm
  • Project year: 2017

Image Courtesy © Mathias Jacob

The privacy of interior spaces was addressed by limiting and directing the views to and from the exterior. This was accomplished by arranging mass and void volumes through the perimeter, placing openings to allow certain views. The mass and void relation is contained between the two horizontal planes of floor and ceiling. The mass volumes offer interior space for furniture and closets. The voids open views and access to the exterior through floor-to-ceiling windows, which are receded from the facade, forming covered exterior spaces. This confinement between two horizontal planes is only interrupted in the central room, where space is defined by a ceiling at a higher level. The difference between both ceiling heights allows natural light to enter through a ribbon window.

Image Courtesy © Mathias Jacob

Image Courtesy © Mathias Jacob

The rooms are divided in three zones. To the east there are two bedrooms and two bathrooms. The central room is a social area, containing living, dining, kitchen facilities and entry hall. This space opens to a covered terrace to the north. To the west, the working studio opens to the central room and to the terrace, and is also connected to a covered service yard with a sink, where the work with wet materials is done.

Image Courtesy © Mathias Jacob

Image Courtesy © Mathias Jacob

The future transformation for exclusively residential use considers the following operations. The studio space will become a dining room and will open to a larger kitchen located in the current service yard. The central room will be used as a larger living room. Finally, an extension to the east will add a master bedroom and bathroom, and another bedroom.

Image Courtesy © Mathias Jacob

Image Courtesy © Mathias Jacob

The construction system consists of concrete foundations, steel frame structure and light steel internal walls. A ventilated facade of vertical wooden slats was used for the exterior perimeter. The use of the same material for all exterior walls reinforces the perception of mass volumes interrupted by void spans. The ventilated facade also helps with the thermal control of interior space.

Image Courtesy © Mathias Jacob

Image Courtesy © Mathias Jacob

Image Courtesy © Mathias Jacob

Image Courtesy © Mathias Jacob

Image Courtesy © Mathias Jacob

Image Courtesy © Planmaestro Arquitectos

Image Courtesy © Planmaestro Arquitectos

Image Courtesy © Planmaestro Arquitectos

Image Courtesy © Planmaestro Arquitectos

Tags: ,

Categories: House, Residential, Studio




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise