Open side-bar Menu
 ArchShowcase
Sanjay Gangal
Sanjay Gangal
Sanjay Gangal is the President of IBSystems, the parent company of AECCafe.com, MCADCafe, EDACafe.Com, GISCafe.Com, and ShareCG.Com.

Sol Duc Cabin in Washington by Olson Kundig

 
October 3rd, 2017 by Sanjay Gangal

Article source: Olson Kundig

This 350-square-foot cabin is a small perch for its occupant. When you’re inside or on the deck, you are raised up above the landscape with an excellent view out onto the Sol Duc River. And the interior is like a warm, dry nest. It is located in one of the few temperate rainforests in the world, and “rainforest” here means wet and rather cold, as opposed to wet and hot. Putting the cabin on stilts protects it from the clammy dampness and occasional flooding.

Image Courtesy © Benjamin Benschneider

  • Architects: Olson Kundig
  • Project: Sol Duc Cabin
  • Location: Washington, USA
  • Photography: Benjamin Benschneider

Image Courtesy © Benjamin Benschneider

The owner is an avid steelhead fisherman, and the Sol Duc has some of the best steelhead fishing in Washington State. The design allows him and his wife to arrive at this remote location, open the place up, and get to fishing as quickly as possible. The shutters are operated manually via custom steel rods. The large panels slide on hardware that was originally designed for sliding barn doors, attached to the steel roof beam structure.

Image Courtesy © Benjamin Benschneider

Image Courtesy © Benjamin Benschneider

That it seals up entirely when not in use is important partly because the location is so remote and also because the elements can be punishing. Although the building is virtually indestructible: it’s made of unfinished, mild steel and structural insulated panels. The insides are mostly wood, for a sense of warmth.

Image Courtesy © Benjamin Benschneider

Image Courtesy © Benjamin Benschneider

The materials are a direct response to the surrounding wilderness. Most of the cabin was prefabricated off-site, which minimized construction wastage and site disruption. The loft floor is made from two-by-fours the owner had on site. We simply stacked and glued the pieces together, then threaded bolts through the stack to secure it.

Image Courtesy © Benjamin Benschneider

Image Courtesy © Benjamin Benschneider

Contact Olson Kundig

Tags: ,

Category: Cabin




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise