Fire Station 22 in Seattle, Washington by Weinstein A+U

Article source: Weinstein A+U

Fire Station 22 was conceived in response to two fundamental constraints: a very small and narrow site, and an operational imperative for a drive-through apparatus bay. The site is located on a heavily trafficked arterial street that leads to a freeway intersection, with frequent back-ups challenging access and egress to the station. The congested street precluded the potential for a conventional back-in apparatus bay design.

Image Courtesy © Lara Swimmer

• Architects: Weinstein A+U
• Project: Fire Station 22
• Location: Seattle, Washington
• Photography: Lara Swimmer
• General Contractor: Par-Tech Construction, Inc.
• Structural Engineer: Swenson Say Faget Structural Engineering
• Civil Engineer: LPD Engineering
• Landscape Architect: Murase Associates
• Mechanical Engineer: The Greenbusch Group Inc.
• Electrical Engineer: Stantec

Image Courtesy © Lara Swimmer

In response to these site constraints, the Fire Department mandated the use of a drive-through apparatus bay. Turning radius analyses determined that it was necessary to place the apparatus bay at the back of the site and then locate all of the normal back-of-house support spaces facing the residential neighborhood to the north. Contrary to the conventions of fire station design, in which the “sexy” apparatus bay is normally perceived as the iconic architectural element, the functional imperative for the drive-through circulation relegated the apparatus bay to a location that was screened from public view and placed the pragmatic support spaces at the public face of the building.

A two-story bar facing East Roanoke Street contains administrative functions and support spaces on the main floor with crew quarters above. In order to facilitate quick response times, a centrally located scissor stair with a shared landing reconciles horizontal and vertical circulation.

Image Courtesy © Lara Swimmer

Image Courtesy © Lara Swimmer

The placement of support and crew spaces on the public face of the building presented a unique challenge to express a “civic” presence for the small structure. The functional imperatives for these spaces require limited windows, eliminating the potential to express the station’s program and activities for public view. In response to this challenge, the north façade was fragmented into a series of crenellations to break down the scale of the monolithic façade and create an essential rhythm that could be perceived by passing vehicles. Bunk room windows were inset within these recesses to provide light and ventilation without diminishing privacy.

The civic presence of the facility was enhanced with a concrete hose-drying tower that anchors the building, providing high visibility from surrounding freeways and the adjacent neighborhood while reinforcing the strategic location of the station office on its small civic plaza. A super-scaled and illuminated “22” numeral supplements the civic presence of this “small building that lives large”.

Fire Station 22 achieved LEED Platinum Certification with highly efficient mechanical and plumbing systems, PV panels, and the use of harvested rainwater for 100% of the station’s non-potable water uses.

Image Courtesy © Lara Swimmer

Image Courtesy © Lara Swimmer

Image Courtesy © Lara Swimmer

Image Courtesy © Lara Swimmer

Image Courtesy © Lara Swimmer

Image Courtesy © Lara Swimmer

Image Courtesy © Lara Swimmer

Image Courtesy © Lara Swimmer

Image Courtesy © Lara Swimmer

Image Courtesy © Weinstein A+U

Image Courtesy © Weinstein A+U

Image Courtesy © Weinstein A+U

Image Courtesy © Weinstein A+U

Image Courtesy © Weinstein A+U

Tags: Seattle, Washington

Category: Fire Station

This entry was posted on Monday, June 22nd, 2020 at 11:00 am. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.