Open side-bar Menu
 ArchShowcase

Archive for the ‘Illustrator’ Category

Research and Design Center in Hebei Province, China by Latitude Studio

Friday, June 7th, 2013

Article source: Latitude Studio  

In large industry structures, the construction of the industrial building is based on logistic, distribution and volumetric requirements determined by the production. It is one of the few building types whose value is measured more in terms of equipment assets than how it performs as social infrastructure.

Image Courtesy Latitude Studio

  • Architects: Latitude Studio
  • Project: Research and Design Center
  • Location: Hebei Province, China
  • Year: 2013
  • Type: Commission
  • Status: On-going
  • Client: N/A
  • Chief Designer: Manuel Navarro
  • Project Manager: Lihui Sim
  • Team: Jorge Cortes, Wang Heyi, Carrie Xun, Lin Yiye
  • Software used: Adobe Illustrator CS6, Autodesk Revit Architecture 2013, AutoCad 2010

HDJ58 house in Tijuana, Mexico by T38studio + Pablo Casals-Aguirre

Thursday, May 30th, 2013

Article source: T38studio + Pablo Casals-Aguirre

Single family house in Tijuana, on a site where we are developing ten other single family infill houses on sites that range from 300 sq m to 450 sq m.

Image Courtesy © Alfredo Zertuche

  • Architects: T38studio + Pablo Casals-Aguirre
  • Project: HDJ58 house
  • Location: Tijuana, Mexico, Baja California
  • Photography: Pablo Casals-Aguirre, Alfredo Zertuche
  • Project Team: Alfonso Medina, Pablo Casals-Aguirre, Lucía Arroyo
  • Collaborators: Oscar González, Sara Díaz, Ana Darice Payan
  • Construction: Taller38
  • Project Year: 2011
  • Site surface: 330 m2
  • Built surface: 300 m2
  • Software used: Autocad, skethcup, 3dstudio, photoshop and Illustrator.

(more…)

Sempla Offices in Turin, Italy by DAP studio

Wednesday, May 15th, 2013

Article source: DAP studio

Project statement

The Sempla offices in Turin are housed in an old factory that has been transformed. We decided to  crystallize and preserve the traces of  the past and its degradation, enhancing the power of the contrast between the new and the old.

Open space area: Image Courtesy DAP studio

  • Architects: DAP studio
  • Project: Sempla Offices
  • Location: Turin, Italy
  • Client: Sempla srl
  • Software used: Autocad and Illustrator

(more…)

Elsa Morante Public Library in Varese, Italy by DAP studio

Wednesday, May 15th, 2013

Article source: DAP studio

The pre-existing building for the new Lonate Ceppino Public Library already belonged to Lonate Ceppino’s historical heritage.On a rectangular plan, the two leveled buildings housed the Civic Library on the ground floor, while the first floor had been left unused. From the outside, the main entrance façade has a higher decorative part which is independent from the roof structure.

North view: Image Courtesy © luigifiletici

  • Architects: DAP studio
  • Project: Elsa Morante Public Library
  • Location: Varese, Italy
  • Photography: Luigi Filetici
  • Client: Lonate Ceppino Municipality, Varese
  • Structures: GB. Scolari
  • Facilities: M. Piantoni, A. Bronzoni
  • Contractor: Gruppo Edilia
  • Interior Furniture: Habitat Italiana
  • Design phase: 2006 – 2007
  • Construction phase: 2007 – 2008
  • Software used: Autocad and Illustrator

(more…)

Udbetaling Danmark Holstebro in Hostrupsvej, denmark by CEBRA

Tuesday, May 7th, 2013

Article source: CEBRA

The new domicile for public authority Udbetaling Danmark (UDK) in Holstebro manages a series of vital social services, such as state pension and maternity pay, for the entire region of Midwestern Denmark. The building gathers employees from several municipalities in one new administration building, which has to handle and ensure a centralized and efficient service for the citizens.

Image Courtesy © Mikkel Frost

  • Architects: CEBRA
  • Project: Udbetaling Danmark Holstebro 
  • Location: Hostrupsvej, Holstebro, denmark
  • Photography: Mikkel Frost
  • Commission: Public
  • Type: Turn-key contract
  • Category: Office
  • Client: ATP Ejendommea/s
  • Year: 2011 – 2012, inaugurated October 1st 2012
  • Purpose: Office building and citizen service center
  • Size: 4.600 m²
  • Budget: DKK 77m/€ 10,32m excl. VAT
  • Prize: Competition 1st prize
  • Energy class: Low energy class standard 2015
  • Turn-key contractor: Sjælsø
  • Engineers: Orbicon, Bent Moesby

(more…)

Central Mosque of Pristina Competition Entry in Kosovo by Maden Group

Tuesday, May 7th, 2013

Article source: Maden Group

The study starts from the first religious needs and the study of the earliest mosques architecture in Kosovo and in other countries to convey tradition through contemporary architecture. Our objective was to combine in the best mode architecture and religious rules.

Image Courtesy Maden GROUP

  • Architects: Maden Group
  • Project: Central Mosque of Pristina Competition Entry
  • Location: Pristina, Kosovo
  • Software used: Modeled in Archicad, rendered in Maxwell, and post-produced the renders in Photoshop and Lightroom. Diagrams and other graphics were made in CorelDraw and Illustrator.

(more…)

Brownie in fukuoka, Japan by Uchida Architect Design Office

Sunday, April 21st, 2013

Article source: Uchida Architect Design Office

BROWNIE is a bakery shop and a house, located inside Aso Kuju National park where it is blessed with its rich nature. From the start of the design process, corresponding to the client’s bold belief on bread making using natural, organic, and non-addictive materials, “nature” was strongly intended in the design of this building.

Image Courtesy © Hiroyuki Kawano

  • Architects: Uchida Architect Design Office
  • Project: Brownie
  • Location: Kokonoe, fukuoka, Japan
  • Photography: Hiroyuki Kawano
  • Function : shop + house
  • Site area : 1654 ㎡
  • Building area : 148 ㎡
  • Total Floor Area : 131 ㎡
  • Stories: 1
  • Structure (materials): wooden structure
  • Finish: (exterior) cedar board
  • Finish: (interior) cedar board, plaster
  • Completed date: february 2010
  • Client: shinichi miyamoto
  • Constructional engineer: Hashimoto kensetsu
  • Software used: AutoCAD, Vectorworks, Adobe Illustrator, Adobe Photoshop.

(more…)

House N in Noordwijk, Netherlands by Maxwan Architects + Urbanists

Tuesday, April 9th, 2013

Article source: Maxwan Architects + Urbanists

Built in 1938, this Noordwijk seaside villa was originally the holiday home of a concrete factory owner. Battered and blustered by the salty sea weather over the decades, the house was in need of renovation. Besides roof replacement and basement repairs, the bedrooms, bathrooms and windows were outdated and some spaces had grown too small for the clients’ requirements. Maxwan’s additions bring new distinctive features to the house, while respecting its original character.

Image Courtesy © Filip Dujardin 

  • Architects: Maxwan Architects + Urbanists
  • Project: House N
  • Location: Noordwijk, Netherlands
  • Photography: Filip Dujardin
  • Client: Private
  • Scale: S
  • Team leader: Rene Sangers
  • Partner in charge: Hiroki Matsuura
  • Team: Anna Borzyszkowska, Larraine Henning, Jason Hilgefort, Claudia Strahl
  • Collaborators: F. Wiggers – Varsseveld (structural engineer)
  • Software used: Autocad, 3dmax, Photoshop, Illustrator

NANBOYA shinsaibashi in Osaka, Japan by PROCESS5 DESIGN

Saturday, April 6th, 2013

Article source: PROCESS5 DESIGN

This is a plan for a specialist valuables for cash service boutique on the 2nd floor of a building facing the Shinsaibashisuji shopping centre in the business district of the merchant town of Osaka. Existing s valuables for cash service have the image of pawnshops and the current situation is that there is no choice but to compete with the purchasing prices of rival companies.

Image courtesy PROCESS5 DESIGN 

  • Architects: PROCESS5 DESIGN
  • Project: NANBOYA shinsaibashi
  • Location: Osaka, Japan
  • Design: PROCESS5 DESIGN Ikuma Yoshizawa, Noriaki Takeda, Tatsuya Horii
  • Contractor: TORENTA Co., Ltd.
  • Collaborator: Lighting Designer: DAIKO ELECTRIC Co., Ltd., Yoshihide Ueo
  • Construction type: Interior and exterior Renewal
  • Construction phase: 19 jun. 2012 ~ 28 jun.
  • Total cost of construction: 5.9million yen | include design fee

Companhia das Culturas in S. Bartolomeu, Portugal by Ressano Garcia Arquitectos

Wednesday, April 3rd, 2013

Article source: Ressano Garcia Arquitectos

Companhia das Culturas is an old rural farm that has been completely redesigned to accommodate cultural events. The project aims to value local cultural expressions and make use of contemporary technologies to achieve a high standard of sustainability.

Image Courtesy © Manuel Aguiar

  • Architects: Ressano Garcia Arquitectos
  • Project: Companhia das Culturas
  • Location: S. Bartolomeu, Portugal
  • Photography: Manuel Aguiar
  • Software used: FormZ, illustrator and progeCAD

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise