Open side-bar Menu
 ArchShowcase

Archive for the ‘AutoDesSys’ Category

Saijo Clinic in Tokyo, Japan by Aida Atelier, Inc.

Friday, July 20th, 2012

Article source:  Aida Atelier, Inc.

Saijo Clinic is a private mental health clinic with short-care/group-care programs on the 11th floor penthouse of a building facing Shinjuku Gyoen Park, 58ha urban park located in central Tokyo. The penthouse was originally built as a part of a gigantic signboard on rooftop. The sign graphic was later abolished by newly introduced landscape regulations, however, the space inside was left over. In designing the interior of the clinic, we sought to incorporate the extraordinary contrast between different urban scales.

Image Courtesy Tatsuya Noaki

  • Architects:  Aida Atelier, Inc.
  • Project: Saijo Clinic
  • Location:Shinjuku, Tokyo, Japan
  • Program: Mental Clinic
  • Design Team: Tomoro Aida + Shinpei Uehara
  • Sign design: Takeru Ide
  • Construction: Apex, LTD.
  • Furniture: inter.office
  • Design: 12/2010 – 02/2011 (3 months)
  • Construction: 02/2011 – 03/2011 (1 month)
  • Floor: 11F (Penthouse)
  • Floor area: 116.56m2
  • Photography: ©Tatsuya Noaki
  • Software used: AutoCAD, FormZ, Illustrator, Photoshop

(more…)

N-House in Tokyo, Japan by Takato Tamagami Architectural Design

Wednesday, July 18th, 2012

Article source: Takato Tamagami Architectural Design

This is a two-generation family housing situated on high ground in Tokyo metropolitan area. The housing is composed of two interlocked volumes of A-House and B-House.  We intend to provide completely different spatial sequences in both houses.

The site is 15m(width) x 30m(length), long in south-north direction. Church, which is mainly used as facility for wedding parties, is located on the west side. We created a U-shaped volume and a courtyard in the middle, in order to get enough sunlight from all directions. Exterior finish is white cement plaster exposed aggregate finish with coral sand. The white volume sits on the basement, where separate entries to both houses and car parking are located.

Image Courtesy Masaya Yoshimura

  • Architects: Takato Tamagami Architectural Design
  • Project: N-House
  • Location: Tokyo, Japan
  • Construction:  SATOHIDE corporation
  • Photographer:  Masaya Yoshimura
  • Scope of work:  new construction
  • Structure:  reinforced concrete structure
  • Principal use:  Residence
  • Total floor area:  586.87m2
  • Construction Period:  2010.10.18~2012. 2.17
  • Software used: Vectorworks to draw 2D and FormZ to draw for 3D

(more…)

Portico in Tokyo, Japan

Wednesday, July 11th, 2012

Article source: Aida Atelier, Inc.

This is a house for a family of three in a residential neighborhood of suburban Tokyo. Surrounded by properties subdivided through generations of time, this site maintains its original state. Albeit having plenty of land relative to others, six different adjacent properties with homes built tightly to the boundary leaves the project site with a condition, which limits the project from fully enjoying the advantage of having a deep street frontage with the river. Such meticulous condition of uneven contextual grain at a time of transition from continuing growth and expansion, it shall undoubtedly be emerged in mass in the residential neighborhood. As such, the theme for this project is the approach to architecture and exterior space that receives undulating peripheral density.

Image Courtesy Tatsuya Noaki

  • Architects: Aida Atelier, Inc. + Kuno Lab.
  • Project: Portico
  • Location: Tokyo, Japan
  • Program: Single Family Residence
  • Design Architect: Tomoro Aida + Toshimitsu Kuno + Shinpei Uehara (Aida Atelier, Inc. + Kuno Lab. / Nagoya City Univ. Graduate School of Design and Architecture)
  • Executive Architect: Tomoro Aida + Toshimitsu Kuno + Shinpei Uehara + Tomoki Nagase
  • Software used: AutoCAD, FormZ, Photoshop and Illustrator

(more…)

Loft of Frank and Amy in Hell’s Kitchen, New York City by Resolution: 4 Architecture

Saturday, June 23rd, 2012

Article source: Resolution: 4 Architecture

Designed for a writer and a film editor, the Loft of Frank and Amy is a bare, wide-open play space in New York City’s gritty Hell’s Kitchen neighborhood. Located in a former industrial building, the loft occupies an entire floor with full window exposure and dynamic urban views on three sides. The design enhances this industrial context by posing new construction as a single sculptural intervention within this existing space.

kitchen (Image Courtesy Paul Warchol)

  • Architects: Resolution: 4 Architecture
  • Project: Loft of Frank and Amy
  • Location: Hell’s Kitchen, New York
  • Completion Date: 2000
  • Size: 4,800 sf
  • Construction Cost: $275,000
  • Bedrooms: 3
  • Baths: 3
  • Features: Writing Room, Open Loft Living, Dining & Kitchen
  • Software used: FormZ & Vectorworks

(more…)

Lake Iosco House in Bloomingdale, New Jersey by Resolution: 4 Architecture

Saturday, June 23rd, 2012

Article source: Resolution: 4 Architecture

Designed as a second home for a single mom and young son who live in Manhattan only 45 minutes away, this two-story single bar scheme is positioned as close to the lake as zoning allows. The result is a long linear composition oriented north south, with complementing sunrise and sunset decks to the east and west. Lake views are available from all rooms.

Image Courtesy RES4

  • Architects: Resolution: 4 Architecture
  • Project: Lake Iosco House
  • Location: Bloomingdale, New Jersey
  • Completion Date: 2009
  • Size: 2,100 SF
  • Typology: Two-story Single Bar Series
  • Modules: 4 Boxes, Panelized Fireplace/Storage
  • Bedrooms: 3
  • Baths: 2.5
  • Software used: FormZ & Vectorworks

(more…)

Mensa Moltke in Karlsruhe, Germany by J. MAYER H. Architects

Friday, June 8th, 2012

Article source: J. MAYER H. Architects

A new canteen for the Technical College, Teacher Training College and the State Academy for Fine Art has been completed north of the Moltkestrasse. This new address will form an attractive new centre for the campus where the disciplines can meet, eat and exchange ideas.

Image Courtesy David Franck

  • Architects: J. MAYER H. Architects
  • Project: Mensa Moltke
  • Location: Karlsruhe, Germany
  • Project Team: Juergen Mayer H., Andre Santer, Julia Neitzel, Sebastian Finckh, Wilko Hoffmann, Marcus Blum
  • Competition Team: Juergen Mayer H., Dominik Schwarzer, Wilko Hoffmann, Ingmar Schmidt, Daria Trovato, Sebastian Finckh,
  • Concept-Schema Nutellagram: Jan-Christoph Stockebrand
  • International Competition: 2004
  • Project Date: 2005 – 2006
  • Completion: 2007
  • Software used: ArchiCad and FormZ

(more…)

Malbaie VI Marée Basse in La Malbaie, Québec by MU Architecture

Friday, June 1st, 2012

Article source: MU Architecture

Located in Cap-à-L’ Aigle in the splendid region of Charlevoix, the residence Marée Basse (Low Tide) is part of the residential development Les Terrasses Cap-à-L’ Aigle. Capitalizing on an exceptional view of the St. Lawrence River, the surrounding nature and the land form of the region, this development meets the highest standards and promotes contemporary architecture and local know-how.

Image Courtesy Ulysse Lemerise Bouchard (YUL Photo)

  • Architects: MU Architecture
  • Project: Malbaie VI Marée Basse
  • Location: Cap-à-l’Aigle, La Malbaie, Québec
  • Project team : Jean-Sébastien Herr, Charles Côté, Audrey Lavallée
  • Client : Florent Moser (Les Terrasses Cap-à-l’Aigle)
  • Contractor: Florent Moser/ Alain Rajotte
  • Structural Engineer: I-Level
  • Project completion date: September 2011
  • Photograph: Ulysse Lemerise Bouchard (YUL Photo)
  • Project year: September 2011
  • Project area: 3200 pi2
  • Software used: AutoCAD, Form-Z and Maxwell render

(more…)

Zhengzhou Mixed Use Development in China by Trahan Architects

Thursday, May 10th, 2012

Article source: Trahan Architects

Located in central China, Zhengzhou is experiencing rapid re-development.  Part of a broad scale master plan labeled “The Rise of Central China”; Zhengzhou is implementing a two part initiative:  ecological and infrastructural development.  Ecological development prioritizes the surrounding natural resources; forest park, scenic areas, wetlands/reserves, rivers/lakes & urban green space.  Infrastructural development addresses an emerging market identified as “Logistics Industry”.  Zhengzhou is to serve as an integrated hub for the import/export of goods and mass transportation which connects the east and the west.

Aerial Perspective 01

  • Architects: Trey Trahan, FAIA
  • Project: Zhengzhou Mixed Use Development
  • Location: Zhengzhou, China
  • Program: Mixed Use Development
  • Floor Area: 400,000 sm (4,305,564 g.s.f.)
  • Cost: $880,000,000 (USD)
  • Completion: To Be Announced
  • Principal Architect: Trey Trahan, FAIA
  • Senior Designer: Mark Hash
  • Project Team: Art Terry, Michael McCune and Kim Nguyen
  • Software used: Maya, Rhino, FormZ and Grasshopper (3D modeling), AutoCAD (2D plans and sections), Illustrator (graphics)

(more…)

Joukowsky Institute for Archaeology & the Ancient World in Providence, Rhode Island by Anmahian Winton Architects

Wednesday, February 1st, 2012

Article source: Anmahian Winton Architects

The Joukowsky Institute for Archaeology and the Ancient World completely reinvents Rhode Island Hall, a historic Greek Revival building at the center of the Brown University campus. It is an endowed institute, serving the Brown community with teaching, research, fieldwork, and classroom studies for both graduates and undergraduates.

Image Courtesy Peter Vanderwarker

  • Architects: Anmahian Winton Architects
  • Project: Joukowsky Institute for Archaeology & the Ancient World
  • Location: Providence, Rhode Island
  • Owner: Brown University
  • Engineer: RDK Engineers; Richmond So Engineering; GZA GeoEnvironmental Inc.
  • General Contractor: Shawmut Design & Construction
  • Landscape: Hines Wasser & Associates
  • Lighting: LAM Partners, Inc.
  • Photography: Peter Vanderwarker
  • Software used: Vectorworks and FormZ

(more…)

Exhibition Center of the City of Sherbrooke in Quebec, Canada by CCM² – Côté Chabot Morel Architects

Tuesday, January 24th, 2012

Article source: CCM ² – Côté Chabot Morel Architects

The mandate of the “Centre de foires de Sherbrooke” (Exhibition Center of Sherbrooke) conducted by CCM² – Côté Chabot Morel Architects includes site analysis, the design of the site plan and the floor plans, the volumetric studies, the materials selection, the establishment of the performance criteria s and a constant support as a specialized external resource for the City of Sherbrooke until the complete realization of the project. The expertise and qualifications of CCM² Architects are well recognized in the community to carry out such projects. For several years, CCM² Architects have done several feasibility studies, conceptual works, analysis and construction of exhibitions centers in Quebec (Quebec City and City of Laval in Canada).

Image Courtesy Stéphane Groleau

  • Design Team Architects: CCM ² – Côté Chabot Morel Architects
  • Project: Exhibition Center of the City of Sherbrooke
  • Location: Sherbrooke, Quebec, Canada
  • Project manager : Pierre Morel
  • Design Team : Yan Laplante, Mathieu Morel, Pierre Morel
  • Technical validation : Julie Nadeau, Aryann Gosselin
  • Engineers : SNC Lavalin ACHIEVEMENT
  • Client: The City of Sherbrooke
  • Realization: 2010-2011
  • Software used: FormZ

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise