Open side-bar Menu
 ArchShowcase

Archive for the ‘Rhino’ Category

Trefoil Glass House in Vermont by J.Roc Design

Tuesday, June 13th, 2017

Article source: J.Roc Design

The Trefoil House inherited a pre-existing three-sided hearth and partial foundation, located on a rural sloped site in Stowe, Vermont. The house was reimagined using the hearth as a structural and narrative generator: The house is built out from its triangular core as three squares joined at the corners. The three-sided hearth is used as a central program driver, producing a continuous trefoil circulation loop around the perimeter of each square and providing a central point of orientation while allowing for the house to spread into the landscape. Public spaces are enclosed in glass, while private spaces are shielded with sculpted louvers to differentiate the rotationally symmetric plan. A 150 foot long curtainwall wraps continuously around six sides of the house. The trefoil circulation allows for an unbroken perceptual experience of the pristine site, but critically also allows for an entirely wheelchair accessible upper level in order to accommodate the client’s elderly parents and an aging-in-place philosophy.

Image Courtesy ©  J.Roc Design

  • Architects: J.Roc Design
  • Project: Trefoil Glass House
  • Location: Vermont, USA
  • Software used: Rhino
  • Contractor: Cypress Woodworks
  • Structural Engineer: Harris Structural Engineering

(more…)

Changbaishan Ski Jumps in Jilin Province, China by GRAFT GmbH

Sunday, June 4th, 2017

Article source: GRAFT GmbH

After two decades of infrastructural and urban development, China is now also expanding rapidly in the tourism sector. To promote faster growth, the Chinese government declared several “tourism formation zones”. One of these is the area around the spectacular Changbai volcano in the province Jilin, adjoining the border to North Korea. The region is dominated by vast forests that extend as far as Siberia. The permafrost between November and April makes the area a potential tourist mecca for winter sports.

Image Courtesy © GRAFT GmbH

  • Architects: GRAFT GmbH
  • Project: Changbaishan Ski Jumps
  • Location: Wangtiane, Changbai Mountain, Jilin Province, China
  • Software used: Rhino, Grasshopper
  • Client: Zhonghong Investment Co. Ltd
  • GFA: 88,000 m²
  • Year: 2006

(more…)

MeMo HOUSE in Buenos Aires, Argentina by BAM! arquitectura

Sunday, June 4th, 2017

Article source: BAM! arquitectura

The MeMo house, which was built on a plot in San Isidro, in the northern part of the province of Buenos Aires, Argentina, was conceived on the premise of a client who is passionate about landscaping and has a strong conviction regarding sustainability and the environment. The premise was to develop a project in a plot between infill buildings while reducing to the maximum extent possible the loss of green spaces due to the construction of the house.

Image Courtesy © Jeremías Thomas

  • Architects: BAM! arquitectura
  • Project: MeMo HOUSE
  • Location: San Isidro, Provincia de Buenos Aires, Argentina
  • Photography: Jeremías Thomas
  • Software used: Rhino and Lumion
  • Head Architects: Gonzalo Bardach – Matías Mosquera
  • Design Team: Gonzalo Bardach – Matías Mosquera – Marcos Gonzalez Mazza – Angélica Weissheim
  • Landscape Design: Bulla

(more…)

Bosjes Chapel in Western Cape, South Africa by Steyn Studio

Tuesday, May 30th, 2017

Article source: Steyn Studio 

The new chapel, set within a vineyard in South Africa, is designed by South-African born Coetzee Steyn of London based Steyn Studio. Its serene sculptural form emulates the silhouette of surrounding mountain ranges, paying tribute to the historic Cape Dutch gables dotting the rural landscapes of the Western Cape. Constructed from a slim concrete cast shell, the roof supports itself as each undulation dramatically falls to meet the ground. Where each wave of the roof structure rises to a peak, expanses of glazing adjoined centrally by a crucifix adorn the façade.

Image Courtesy © Adam Letch

  • Architects: Steyn Studio
  • Project: Bosjes Chapel
  • Location: Bosjes Farm, Witzenberg District, Western Cape, South Africa
  • Photography: Adam Letch
  • Software used: Rhino, Revit, Autodesk Inventor
  • Project architect: TV3 Architects (South Africa)
  • Furniture Design: Liam Mooney Studio
  • Contractor: Longworth & Faul
  • Structural engineer: Henry Fagan & Partners
  • Mechanical & Electrical engineer: Solution Station
  • Quantity surveyor: De Leeuw
  • Planning consultant: Ron Brunings

(more…)

CENTRO*Arezzo Coop.fi in Florence, Italy by Piuarch

Sunday, May 28th, 2017

Article source: Piuarch

An iconic urban landmark, but also a sustainable structure for an evolving shopping experience: the new CENTRO*Arezzo Coop.fi frees itself from the conceptual dictates of the traditional shopping mall and acts as a social and recreation pole that is perfectly integrated with the city. Opened in 1988, the complex has undergone a significant aesthetic and functional redevelopment that has completely changed its identity and its relationship with the surrounding environment.

Image Courtesy © Giovanni Hanninen

  • Architects: Piuarch
  • Project: CENTRO*Arezzo Coop.fi
  • Location: Florence, Italy
  • Photography: Giovanni Hanninen
  • Software used: Autocad, 3D Studio Max, V-Ray and Rhino
  • Partners: Francesco Fresa, German Fuenmayor, Gino Garbellini and Monica Tricario
  • Associates: Cristina Castelli, Marco Dragoni, Luca Lazzerotti, Mauro Mandelli, Gianni Mollo, Miguel Pallares, Salvatore Seggio and Jenny Spagnolatti

(more…)

IN.DENT in Woodland Hills, California by AN.ONYMOUS

Friday, May 19th, 2017

Article source: AN.ONYMOUS

In his essay, “On Trial 1: The situation. What architecture of technology?,” published in1962, Reyner Banham called the suspended ceiling a “Utopian or a Dymaxion dream.” He maintained that suspended ceilings had achieved a degree of industrialization, flexibility, and interchangeability of parts—accommodating a range of services such as heating and cooling, ventilation, lighting, sound, fire-extinguishing, acoustic control, etc.—that far surpass the limited functions of exterior paneling or curtain-wall systems. “Taken grosso modo, one-offs, off-the-pegs, standardized and specialized,” he wrote, “all together, suspended ceilings represent probably the greatest achievement to date in accommodating technology to architecture.” Yet, despite its remarkable all-pervading presence, in Banham’s view, the suspended ceiling had been unremarked in the mythologies of modern architecture. “No one is for or against suspended ceilings,” he argued, “and yet they constitute one of the most sophisticated elements in the technology of architecture.”

Image Courtesy © Austin Yu

  • Architects: AN.ONYMOUS
  • Project: IN.DENT
  • Location: 6325 Topanga Canyon Blvd., Woodland Hills, California 91367, United States
  • Photography: Neave Bozorgi and Austin Yu
  • Software used: Rhino, Grasshopper
  • Client: Brighton Periodontal and Implant Group
  • Project Team: Iman Ansari, Marta Nowak, Shiqi Fan, Chun-Hua Chiu, Isabel Branas, Dan Zhu, Maria Katticaran
  • Area: 1,600 ft2
  • Project Year: 2017

(more…)

Webster Terrace in Nova Scotia, Canada by TEAL

Friday, May 19th, 2017

Article source: TEAL 

Webster Terrace was a distinguished modern movement house built in three stages. It had an open plan living/dining/kitchen with a distinctive sloped ceiling extending into a mono slope cantilevered roof.

Image Courtesy © Riley Smith

  • Architects: TEAL
  • Project: Webster Terrace
  • Location: Halifax, Nova Scotia, Canada
  • Photography:  Riley Smith Photographer
  • Software used: Revit, 3DS Max and Rhino
  • Other participants:

    • General Contractor: Special Projects Limited
    • Structural Engineer: Campbell Comeau Engineering
    • Subcontractor: JETCO Contracting Inc
  • Gross Built Area (square meters or square foot): 3800 SF
  • Completion Year: 2017

(more…)

Falcon Beach House in Panamuna Drive, Australia by iredale pedersen hook

Thursday, May 18th, 2017

Article source: iredale pedersen hook 

The Falcon House challenges the inappropriate, contemporary approach of destroying the native landscape and topography. The upper level hovers gently as a white object, the lower level is a black shadow, in the middle is a thin zone of grey that reminds us that nothing is ever ‘black or white’.

Image Courtesy © Dion Robeson

  • Architects: iredale pedersen hook
  • Project: Falcon Beach House
  • Location: Lot 869, No. 18 Panamuna Drive, Falcon, Western Australia
  • Photography: Dion Robeson
  • Software used: SketchUp, Vectorworks, Rhino
  • Project team iph: Adrian Iredale, Finn Pedersen, Martyn Hook, Mary McAree, Vincci Chow, Jason Lenard, Caroline Di Costa, Khairani Khalifah, Matthew Omodei, Melissa Loong, Penny Anderson, Sinan Pirie
  • Site Area: 981 sqm
  • Building Area: 210sqm
  • Deck Area: 80sqm
  • Status: Complete November 2016

(more…)

Cykelslangen (The Bicycle Snake) in Copenhagen, Denmark by DISSING+WEITLING architecture

Thursday, May 18th, 2017

Article source: DISSING+WEITLING architecture 

With the change from commercial harbour activities to residences and retail, the Inner Harbour of Copenhagen has undergone a pronounced transformation. In this case, the clients brief called for a somewhat minimal bicycle ramp providing an alternative to the staircase. DISSING+WEITLING saw a tremendous potential for the new ramp to become something more than just replacing the staircase. The solution was ‘The Bicycle Snake’. The 230m elevated ramp ensures the complete separation of cyclists and pedestrians – the cyclists can pass quickly and easily through the area, while experiencing unique and exciting views and the elevated road allows pedestrians to use the entire wharf avoiding perilous situations.

Image Courtesy © Rasmus Hjorthoj

  • Architects: DISSING+WEITLING architecture
  • Project: Cykelslangen (The Bicycle Snake)
  • Location: Copenhagen, Denmark
  • Photography: Ole Malling and Rasmus Hjorthoj
  • Software used: Rhino, Grasshopper

(more…)

The Lima Art Museum New Contemporary Art Wing in Distrito de Lima, Peru by Efficiency Lab for Architecture PLLC

Wednesday, May 17th, 2017

Article source: v2com

The New Contemporary Art Wing Expansion to the Lima Art Museum located in the 19th century Exposition Palace, creates a strong architectural dialogue between the historical structure and the new expansion; they connect without touching. The project requirement to create a below grade expansion to the current museum without touching the historical structure below or above grade, resulted in a careful exploration of how to spatially connect these two buildings that cannot physically connect.

View from the plaza, Image Courtesy © Efficiency Lab for Architecture PLLC

  • Architects: Efficiency Lab for Architecture PLLC
  • Project: The Lima Art Museum New Contemporary Art Wing
  • Location: Distrito de Lima, Peru
  • Software used: Rhino, Grasshopper and V-Ray
  • Client: Lima Art Museum
  • Designer: Aybars Asci, AIA
  • Project Size: 7,000 SM

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise