Open side-bar Menu
 ArchShowcase

Archive for the ‘Artlantis’ Category

V Tower in Denver, Colorado by Meridian 105 Architecture (designed using Artlantis and Revit)

Wednesday, June 8th, 2011

Article source: Meridian 105 Architecture

V Tower is a residential high rise positioned atop of a base of retail, restaurant, cafe, and parking.  The project establishes a new ‘ground’ plane above this volume by providing residents with an urban park occupying the full dimensions of the site and building footprint, creating a sense that the tower is built at grade. Among the amenities provided at this level are generous open areas of grass, a pool, and community garden.

Night View

  • Architects: Meridian 105 Architecture
  • Project: V Tower
  • Location: Denver, Colorado
  • Design Year: 2011
  • Anticipated Completion: 2011
  • Quanity of Units: 240
  • Software used: Modeled in Revit 2011 and rendered in Artlantis

(more…)

V-HOUSE in Leiden, The Netherlands by GAAGA

Wednesday, June 1st, 2011

Article source: GAAGA

V- HOUSE is designed for a private client and is located in the urban planning area “Nieuw Leyden”, a high dense area in the city of Leiden (The Netherlands).

Front View (Images Courtesy Marcel van der Burg)

  • Architect: GAAGA
  • Name of Project: V-HOUSE
  • Location: Leiden, The Netherlands
  • Team: Esther Stevelink and Arie Bergsma
  • Client: private
  • Realisation: 2008 – 2010
  • Contractor: Verbeij Bouw, Boskoop.
  • Structural Engineering: IMD,  Rotterdam
  • Energy performance & building physics: GAAGA – Arie Bergsma
  • Photographs: Marcel van der Burg
  • Software used: Autocad and Artlantis software for rendering

(more…)

Tall Emblem Structure in Za’abeel Park, Dubai, UAE by Marco Acerbis Architetto

Sunday, May 15th, 2011

Article source: Marco Acerbis Architetto

XI ThyssenKrupp Elevator Architecture Award

The location of this new tower is a beautiful green area surrounding a lake and very close to the city. The proximity to the airport will give the new building an opportunity to be seen from the sky and not only from the earth. The landscape of the city area is mainly flat and with very strong sunlight. Climate conditions are typical of this latitude and are certainly extreme in some months of the year. A lot of time was spent thinking about what the best gesture for such a scenario would be. So that in one building I could respond to all area conditions and social expectations required by a new iconic tower. A particular thought was given to the experience that children shall obtain from a contemporary building.

Tall Emblem Structure

  • Architect: Marco Acerbis Architetto
  • Name of Project: Tall Emblem Structure
  • Location: Za’abeel Park, Dubai, UAE
  • Software used: Rhino and Artlantis

(more…)

Villa Belvedere in Cuneo, Italy by Marco Acerbis Studio

Thursday, May 12th, 2011

Located in one of the most beautiful northern Italian landscapes, Villa Belvedere literally conveys the astonishing surroundings in one simple yet animated object.  Its lightness reminds of the wings of a plane and the way it plays with light and shadows enhances what at first sight might appear as an elementary geometry. It is not. The whole house, located on one single floor and covered by one big statement roof is articulated to create an architectural experience of constantly changing views, lights and colours while walking through internal gardens, huge living spaces, a sixty meter long and top lit corridor, independent spacious private rooms and a secret hidden garden with plunge pool.

Villa Belvedere

  • Architects: Marco Acerbis Studio
  • Project: Villa Belvedere
  • Location: Cuneo, Italy
  • Completion: 2008
  • Area: 1000 mq
  • Client: Private
  • Software used: Rhino and Artlantis

(more…)

Polins in Portogruaro, Italy by Marco Acerbis Studio designed using Rhino and Artlantis

Tuesday, May 10th, 2011

Within the development of Eastgate Park, namely the largest logistic and industrial masterplan in the North East of Italy and covering an area of 1,8 million of square meters, the new Polo per l’Innovazione Strategica has been completed. This new multifunctional building is generated by the cooperation between Portogruaro Council and Portogruaro Campus (Ca’ Foscari University, Venice) and has the objective of developing new business strategies by merging the university world, the business consulting world and the entrepreneurial world.

Exterior View

  • Architect: Marco Acerbis Studio
  • Name of Project: Polins
  • Location: Portogruaro, Venezia, Italy
  • Completion time: 2008-2010
  • Area: 800 mq superficie coperta / covered area
  • Client: Pirelli Re / Fondo Spazio Industriale / Comune di Portogruaro
  • Certifications: Casa Clima Classe A+, Klima Haus Class A+
  • Software used: Rhino and Artlantis

(more…)

Bahamas Villa by Marco Acerbis Studio

Tuesday, May 10th, 2011

The villa is located at the centre of the garden allowing the building to naturally grow from the earth and to stand out like a beautiful tropical flower. The ground floor slab is suspended a foot off the ground allowing natural ventilation and cooling. The concrete mass of the slabs together with the swimming pool water are natural cooling elements that will absorb heat during the day providing a fresh and relaxing environment. The scheme provides for a very open yet protected floor arrangement allowing for a confortable inside outside living environment where boundaries are reduced to the minimum and enjoyment of an ever changing villa is enhanced to the maximum with balance and elegance.

Bahamas Villa

  • Architects: Marco Acerbis Studio
  • Project: Bahamas Villa
  • Location: Bahamas
  • Competition: Bahamas Design Challenge
  • Area: 650 mq
  • Client: Private
  • Software used: Rhino and Artlantis

(more…)

Piraeus Tower in Athens, Greece by Marco Acerbis Studio

Tuesday, May 10th, 2011

2010 International Competition the ‘New Face of Pireus Tower’, The second highest tower in Athens

Simple ideas have often been the driving force for the evolution of human kind, like the idea of the sails that allowed Greek ships to cruise all over the Mediterranean sea. Today, in an era of complex energy problems we also need simple solutions to difficult problems. To provide a  new look to the tower we have to think more about the environment and the energy consumption that we would  spend to climatize a building.

Evening View

  • Architect: marco acerbis studio
  • Name of Project: Piraeus Tower
  • Location: Athens, Greece
  • Client: Greek Architects, DuPont
  • Software used: Rhino and Artlantis

(more…)

8 Blacks in Kuldigas, Latvia by NRJA Architects

Friday, April 15th, 2011

Initially planned as a holiday house, at the end of the design process – socially active family’s living house complex at the River Venta near Kuldiga. The place drags in to live there.

8 BLACKS

  • Architects: NRJA Architects
  • Projects: 8 Blacks
  • Location: Latvia, Kuldigas, “LICI”
  • Architects Team: Uldis Luksevics, Ieva Lace, Linda Leitane, Ints Mengelis
  • Building Constructions: Gatis Vilks & Viktors Mitrofanovs
  • Photo Credit: Gatis Rozenfelds, NRJA
  • Project Design Time: 2004-2010
  • Construction Time: 2005-2011
  • Construction Company: RBS SKALS
  • Software used: For drawings – AutoCad, for model – sketchup, final render – Artlantis, post-processing – Photoshop

(more…)

House NL III in Leiden, Netherlands by GAAGA

Sunday, April 3rd, 2011

Article source – GAAGA

House NL III is designed for a private client and is located in the urban planning area “Nieuw Leyden” in the city of Leiden (The Netherlands).

House NL III by GAAGA

  • Architects: GAAGA – Esther Stevelink en Arie Bergsma
  • Location: Leiden, The Netherlands
  • Client: private
  • Realization: 2008 – 2010
  • Contractor casco structure: Bruijnes, Alphen aan de Rijn. The rest of the house was built by the owner himself.
  • Structural Engineering: IMD, Rotterdam
  • Installations: Bemeco Installatietechniek, Nieuw Vennep
  • Energy performance & building physics: GAAGA – Arie Bergsma
  • Photographs: Marcel van der Burg – commissioned by Häuser
  • Software used: Autocad, Artlantis

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise