AECCafe Today Archive for the ‘Uncategorized’ CategoryComeback predicted for tech sectorWednesday, January 13th, 2010The technology sector is poised for a comeback in 2010, according to a report released Tuesday morning by Forrester Research, an industry analysis group. IT firms will benefit as companies and governments restart their spending on tech infrastructure and software, the firm predicts. –Daily Finance http://www.dailyfinance.com/story/tech-spending-set-to-rebound-in-2010/19313261/ Intergraph acquires COADEWednesday, January 6th, 2010Today Intergraph acquired COADE Holdings, Inc. , the Houston based company that provides CAESAR II, PV Elite and TANK products, widely used software for pipe stress, pressure vessel and storage tank analysis, as well as the CADWorx plant design suite. In a conversation with Patrick Holcomb, executive vice president Business Development for Intergraph, he said that Intergraph’s existing SmartPlant Enterprise product line does not have analysis capability, so the acquisition will greatly enhance their offerings. In addition, the DWG-based CADWorx plant design suite is a direct competitor to Autodesk’s Plant 3D product and Bentley Plant. This acquisition will fill Intergraph’s need for a product that addresses the entry level plant and process user. COADE employees and offices will be retained by Intergraph. AECCafe at the movies…AvatarTuesday, January 5th, 2010At AU, attendees were treated to a special preview of the film Avatar that debuted over the holidays. I just went to see the film the other evening and found that it was surprisingly good. As a writer, I generally look for story, but my audience here at AECCafe looks for technology. Definitely technology was at work in this film; besides Autodesk’s involvement in the film. Producer John Landau of Lightstorm Entertainment gave a presentation on the visual effects used in the soon-to-be-released feature film, Avatar. Landau partnered with producer/writer James Cameron on this film as well as the Titanic, where he said they “broke new ground in using visualization effects as a storytelling device.” Avatar is shot fully in what is called “stereoscopic 3D.” The making of “Avatar,” which is set in a virgin forest on the planet of Pandora, took two years of new production technology development. Innovations include image-based facial performance capture, a real-time virtual camera for computer-generated production, and the SIMULCAM system, all of which integrate computer-generated characters into live-action scenes. These techniques combined with stereoscopic photography result in a hybrid CG/live-action film. Lightstorm’s virtual camera technology is used to look around in a scene. The actors see the world with themselves in the animation. The camera man can work with all captured performances and track the position of each character as though the viewpoint is a camera view into that virtual world. “It acts how you expect a camera to act in real life, as close to real life action as you can get in a CG world,” said Landau. Filmmaker James Cameron was once a machinist, a truck driver, and then a winner of 11 Oscars, and will be a featured special guest at SolidWorks World 2010, taking place Jan. 31 through Feb. 3 in Anaheim, Calif. Cameron’s films, including Titanic, Aliens, and the Terminator franchise, have amassed over $3 billion in box office receipts, according to a recent press release. Not only a filmmaker, he is also an inventor of technology. Cameron’s films have blazed new trails in visual effects and set numerous performance records. Among Cameron’s inventions:
The story:
For those who want to know what the film is about, IMDB has a great synopsis.
http://www.imdb.com/title/tt0499549/synopsis
For me, the story itself is basically a techno sci fi environmental story with perhaps a touch of “Dances with Wolves.” Ex-marine, paraplegic Jake Sully goes on a mission to Pandora, a moon of the planet Polythemus, populated by an indigenous tribe known as the Na’vi. Colonel Miles Quaritch is in charge of the mission, and responsible for dispensing such military wisdom such as getting the fighting done with so they can all “be home for dinner.” The Na’vi as described by Quaritch are killers that have to be neutralized.
Although the story is not new, the beauty of the virtual landscape is stunning in 3D and the Na’vi people and animals are completely believable and engaging.
It is yet to be seen how this advanced technology will impact the AEC market, but it will be entertaining to watch it unfold.
U.S. states take the initiative in addressing climate changeMonday, January 4th, 2010According to an article in The New York Times (Jan. 3, 2010), “American cities and states — the largest of which have carbon footprints bigger than those of most nations — have quietly been making serious commitments to curb emissions. Instead of finding reasons to do nothing, Congress should build on these actions to fashion a national response to climate change.” http://www.nytimes.com/2010/01/04/opinion/04mon2.html Targeting building product manufacturersMonday, December 14th, 2009Two products that address the inclusion of manufactured products into architectural design, demonstrate the direction not only of sustainable design requirements but also of the need for product information inside building information models and to be able to extract that information for the marketing purposes of building product manufacturers. 1) ecoScorecard – “Anecdotal research shows that designers spend hundreds if not thousands of unbillable hours on some projects researching and calculating the contributions specific products will make toward achieving LEED points. What if you could do it on the fly? Take a chair, put a fabric on it, calculate the final assembled product. Done! Change the fabric, recalculate. Done! ecoScorecard can do that. A web-based tool accessed through a participating manufacturer’s website, ecoScorecard automates the process for searching, evaluating and documenting any available product catalog against every rating system in North America and Canada – in 30 seconds or less. ….ecoScorecard just introduced its new plug-in that works with Google SketchUp and provides a link between popular BIM (Building Information Modeling) tools and environmental rating systems such as LEED, GGHC Labs 21, CHPS, the NAHB Green Home Building Guidelines and other third-party product certifications.” http://www.interiordesign.net/blog/1860000586/post/260051226.html 2) Autodesk Seek Autodesk Seek incorporates information from Autodesk’s Project Showroom and Project Dragonfly. Autodesk reports that US $5-$10 billion a year is spent on marketing by building product manufacturers. According to Scott Hale, vice president, Consulting Services for Avatech Solutions, in one year the market for linking architects with building product manufacturers has “exploded.” The advent of Seek is right on target with the need to bring product information into the Revit model and to be able to share it out with other decision makers. Autodesk Seek embodies photographs and visualization to help building product manufacturers get products to their market. Seek is a pipeline to get data made into 3D models to a wide audience accessible right on the desktop. Manufacturers can make the information available on their websites. Both Project Dragonfly and Project Showroom are set up so homeowners can select tools that they’d like to have in their homes through Seek. Over 1,000 manufacturers are in Seek at this time, and the same downloadable files are available in one manufacturers’ site currently, that of the kitchen appliance vendor, Dacor. Customers can drag and drop such items as ovens into their Revit project using Seek. Project Showroom has allowed Dacor to enhance their experience with digital models. All data comes from Seek and is modeled in 3ds Max, and is comprised of many cached images. |
|||||
|
|
|||||
|
|||||
