Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Shinjuku Sumitomo Building in Japan by Nikken Sekkei Ltd

 
December 8th, 2021 by Sumit Singhal

Article source: Nikken Sekkei Ltd

The Shinjuku Sumitomo Building was built in 1974 in Tokyo’s Nishi Shinjuku district. The site’s expansive “Sankaku Hiroba” (triangular plaza) atrium roof, along with associated renovations, offer a sustainable model for addressing an emerging problem for Japan’s cities: how to carry out renovation projects on large-scale buildings using good maintenance practices. The project also represents a greater societal effort to enliven the urban business district and enhance its value as an accessible gathering place.

Image Courtesy © SS

  • Architects: Nikken Sekkei Ltd
  • Project: Shinjuku Sumitomo Building
  • Location: Shinjuku-ku, Tokyo Japan
  • Photography: Harunori Noda\Gankohsha, SS
  • Client, basic plan, and general supervision: Sumitomo Realty & Development Co., Ltd.
  • Basic design, construction drawings, and supervision: Nikken Sekkei Ltd.
  • Construction drawings and supervision: Taisei Design Planners Architects & Engineers
  • Construction: Taisei Corporation
  • Site area: 14,446㎡
  • Total floor area: 180,195㎡, including atrium (6,700㎡)
  • Floors: 4 basements, 54 above ground (3 mezzanine)
  • Maximum height: 211.35m
  • Structure: Steel, reinforced concrete, steel-reinforced concrete
  • Construction period: Apr. 2017–Jul. 2020

Image Courtesy © SS

Creating a Lively Public Space in the Business District

The building’s construction was a venture into the unknown, so to speak, made possible through innovation and new technologies for tackling numerous challenges. By the early 2000s, nearly 30 years since its completion, the Nishi Shinjuku area had matured as a business district and faced the challenge of how to invigorate an increasingly diverse city. To that end, Shinjuku’s public and private sectors joined hands in a reorganizing effort that is finally bearing fruit. Among them is the public space built in the privately owned area of the building’s outdoor plaza, covered with a massive glass roof. Hopes are high that this indoor space will spark a transformation of metropolitan Shinjuku into a more lively and appealing city. The project is more than a mere makeover; it shows the great potential of such high-rise renovations that aim for urban functionality and value enhancement to meet the demands of a new era.

Image Courtesy © SS

Image Courtesy © SS

Renovating a High-Rise Still in Use

This project was undertaken while the building remained in use. Construction of the glass roof was performed concurrently with major repair work. The huge steel-structured roof (L:140m, W:90m, H:25m) covers a central space devoid of columns. Expansion joints were used above ground so the roof could be structurally independent. Roof-supporting columns were strategically concentrated along the site’s perimeter and the existing periphery in order to minimize the effects on facility renewal and other activities. Concurrent with construction of the roof, seismic retrofitting was performed on the entire building to better counter earthquake-related effects and vibration. Using the building’s existing equipment balconies, second floor inertial rotary damping tubes were installed to connect up to the 49th floor in order to absorb the building’s kinetic energy. All of the tasks were performed without disturbing the building’s exterior or office workspaces.

Image Courtesy © SS

Image Courtesy © SS

Inheriting the Landscape & Redesigning the Legacy

The Shinjuku Sumitomo Building has long been affectionately called the “Sankaku (triangle) Building,” both for its distinctive outward appearance and for its striking interior and exterior detail. For this project, new spaces that respect the legacy landscape were redesigned. For example, red granite formerly used in the exterior (now no longer mined) was reused in the walls of the vehicle entrance. Bricks from the former outer wall design (inspired by the Yodobashi Purification Plant’s brick motif) were “recreated” using laminated bricks that integrate air conditioning, sound deadening, and wall greenery functions.

Image Courtesy © SS

Image Courtesy © SS

Image Courtesy © SS

Image Courtesy © Harunori Noda\Gankohsha

Image Courtesy © Harunori Noda\Gankohsha

Image Courtesy © SS

Image Courtesy © SS

Image Courtesy © Nikken Sekkei Ltd

Image Courtesy © Nikken Sekkei Ltd

Tags: ,

Categories: Building, Gallery, Hall, Offices, Restaurant, Retail




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise